Makita HS301DWAE - Инструкция по эксплуатации - Страница 8

8

ENGLISH

move the base up or down. At the desired depth of cut, 

secure the base by tightening the clamping screw.

For cleaner, safer cuts, set cut depth so that no more 

than one blade tooth projects below workpiece. Using 

proper cut depth helps to reduce potential for danger-

ous KICKBACKS which can cause personal injury.

Bevel cutting

1

2

1. Clamping screw   2. Bevel scale plate

Loosen the clamping screw on the bevel scale plate on 

the front of the base. Set for the desired angle (0° - 45°) 

by tilting accordingly, then tighten the clamping screw 

securely.

Sighting

A

B

1

1. Cutting line

For straight cuts, align the A position on the front of the 

base with your cutting line. For 45° bevel cuts, align the 

B position with it.

Switch action

1

2

1. Lock-off lever   2. Switch trigger

CAUTION:

Before inserting the battery car-

tridge into the tool, always check to see that the 

switch trigger actuates properly and returns to 

the "OFF" position when released.

CAUTION:

Do not pull the switch trigger hard 

without pressing the lock-off lever. This can 

cause switch breakage.

To prevent the switch trigger from being accidentally 

pulled, a lock-off lever is provided. To start the tool, slide 

the lock-off lever and pull the switch trigger. Release the 

switch trigger to stop.

WARNING:

For your safety, this tool is 

equipped with lock-off lever which prevents the 

tool from unintended starting. NEVER use the 

tool if it runs when you simply pull the switch 

trigger without pressing the lock-off lever. Return 

tool a MAKITA service center for proper repairs 

BEFORE further usage.

WARNING:

NEVER tape down or defeat pur-

pose and function of lock-off lever.

ASSEMBLY

CAUTION:

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before carrying out any work on the tool.