Makita DHS900ZU - Инструкция по эксплуатации - Страница 24

Пилы дисковые Makita DHS900ZU - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 64
Загружаем инструкцию
background image

ENGLISH

Troubleshooting for wireless activation function

Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, 

do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace

-

ment parts for repairs.

State of abnormality

Probable cause (malfunction)

Remedy

The wireless activation lamp does 

not light/blink.

The wireless unit is not installed into 

the tool. 

The wireless unit is improperly installed 

into the tool.

Install the wireless unit correctly.

The terminal of the wireless unit and/or 

the slot is dirty.

Gently wipe off dust and dirt on the terminal of the 

wireless unit and clean the slot.

The wireless activation button on the 

tool has not been pushed.

Push the wireless activation button on the tool 

briefly.

The stand-by switch on the vacuum 

cleaner is not set to "AUTO".

Set the stand-by switch on the vacuum cleaner to 

"AUTO".

No power supply

Supply the power to the tool and the vacuum 

cleaner.

Cannot finish tool registration / can

-

celling tool registration successfully.

The wireless unit is not installed into 

the tool. 

The wireless unit is improperly installed 

into the tool.

Install the wireless unit correctly.

The terminal of the wireless unit and/or 

the slot is dirty.

Gently wipe off dust and dirt on the terminal of the 

wireless unit and clean the slot.

The stand-by switch on the vacuum 

cleaner is not set to "AUTO".

Set the stand-by switch on the vacuum cleaner to 

"AUTO".

No power supply

Supply the power to the tool and the vacuum 

cleaner.

Incorrect operation

Push the wireless activation button briefly and 

perform the tool registration/cancellation procedures 

again.

The tool and vacuum cleaner are away 

from each other (out of the transmission 

range).

Get the tool and vacuum cleaner closer to each 

other. The maximum transmission distance is 

approximately 10 m however it may vary according 

to the circumstances.

Before finishing the tool registration/

cancellation; 

- the switch trigger on the tool is pulled 

or;  

- the power button on the vacuum 

cleaner is turned on.

Push the wireless activation button briefly and 

perform the tool registration/cancellation procedures 

again.

The tool registration procedures for 

the tool or vacuum cleaner have not 

finished.

Perform the tool registration procedures for both the 

tool and the vacuum cleaner at the same timing.

Radio disturbance by other appliances 

which generate high-intensity radio 

waves.

Keep the tool and vacuum cleaner away from the 

appliances such as Wi-Fi devices and microwave 

ovens.

24

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Makita DHS900ZU?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"