Makita 5057KB - Инструкция по эксплуатации - Страница 10

10 

Remove and check the carbon brushes regularly. 
Replace when they wear down to the limit mark. Keep 
the carbon brushes clean and free to slip in the holders. 
Both carbon brushes should be replaced at the same 
time. Use only identical carbon brushes. 
Use a screwdriver to remove the brush holder caps. 
Take out the worn carbon brushes, insert the new ones 
and secure the brush holder caps. 

2

1

001520 

To maintain product SAFETY and RELIABILITY, repairs, 
any other maintenance or adjustment should be 
performed by Makita Authorized or Factory Service 
Centers, always using Makita replacement parts. 

OPTIONAL ACCESSORIES 

CAUTION: 

• 

These accessories or attachments are 
recommended for use with your Makita tool 
specified in this manual. The use of any other 
accessories or attachments might present a risk of 
injury to persons. Only use accessory or 
attachment for its stated purpose. 

If you need any assistance for more details regarding 
these accessories, ask your local Makita Service Center. 

• 

For fiber-cement board saw blades 

Carbide-tipped

Specifically designed to professionally cut fiber- 
cement siding, roofing and backerboard.

Diamond-tipped

Designed to professionally cut fiber-cement siding, roofing 
and backerboard while lasting 400% longer than others.

006557 

• 

Rip fence (Guide rule) 

• 

Wrench 13 

NOTE: 

• 

Some items in the list may be included in the tool 
package as standard accessories. They may differ 
from country to country. 

MAKITA LIMITED ONE YEAR WARRANTY

Warranty Policy

Every Makita tool is thoroughly inspected and tested 
before leaving the factory. It is warranted to be free of 
defects from workmanship and materials for the period 
of ONE YEAR from the date of original purchase. 
Should any trouble develop during this one year period, 
return the COMPLETE tool, freight prepaid, to one of 
Makita’s Factory or Authorized Service Centers. If 
inspection shows the trouble is caused by defective 
workmanship or material, Makita will repair (or at our 
option, replace) without charge.
This Warranty does not apply where:

IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY 
INDIRECT, INCIDENTAL OR CONSEQUENTIAL 
DAMAGES FROM THE SALE OR USE OF THE 
PRODUCT. THIS DISCLAIMER APPLIES BOTH 
DURING AND AFTER THE TERM OF THIS 
WARRANTY.
MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED 
WARRANTIES, INCLUDING IMPLIED WARRANTIES 
OF "MERCHANTABILITY" AND "FITNESS FOR A 
SPECIFIC PURPOSE," AFTER THE ONE YEAR TERM 
OF THIS WARRANTY.
This Warranty gives you specific legal rights, and you 
may also have other rights which vary from state to 
state. Some states do not allow the exclusion or 
limitation of incidental or consequential damages, so 
the above limitation or exclusion may not apply to you. 
Some states do not allow limitation on how long an 
implied warranty lasts, so the above limitation may not 
apply to you.

repairs have been made or attempted by others:
repairs are required because of normal wear and 
tear:
the tool has been abused, misused or improperly 
maintained:
alterations have been made to the tool.

EN0006-1 

1. Brush holder 

cap 

2. Screwdriver