Bosch GCB 18V-63 (06012A0400) - Инструкция по эксплуатации - Страница 15

English | 

15

Dust/Chip Extraction

Dust from materials such as lead-containing coatings, some
wood types, minerals and metal can be harmful to one’s
health. Touching or breathing-in the dust can cause allergic
reactions and/or lead to respiratory infections of the user or
bystanders.
Certain dust, such as oak or beech dust, is considered carci-
nogenic, especially in connection with wood-treatment ad-
ditives (chromate, wood preservative). Materials containing
asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the ma-
terials to be worked.

u

Avoid dust accumulation at the workplace. 

Dust can

easily ignite.

Operation

Starting Operation

Inserting the battery

Slide the charged battery 

(11)

 into the power tool from the

front. Press the battery fully into the power tool until the bat-
tery is securely locked.

Switching On and Off

To 

switch on

 the power tool, 

first

 press the lock-off but-

ton 

(1)

, 

then

 press and hold the on/off switch 

(2)

.

The lamp 

(10)

 lights up when the on/off switch 

(2)

 is lightly

or fully pressed, meaning that the work area is illuminated in
poor lighting conditions.
To 

switch off

, release the on/off switch 

(2)

.

Note:

 For safety reasons, the on/off switch 

(2)

 cannot be

locked; it must remain pressed during the entire operation.

Temperature-dependent overload protection

In normal conditions of use, the power tool cannot be over-
loaded. If the power tool is overloaded or the permitted bat-
tery temperature is exceeded, the electronics of the power
tool will switch off until the temperature returns to within the
optimum operating temperature range.

Working Advice

u

Hold the power tool firmly with both hands and make
sure you have a stable footing.

 The power tool can be

more securely guided with both hands.

Select a suitable cutting position for your workpiece, so that
as many teeth as possible of the bandsaw blade 

(6)

 are in

the cut (see figure 

F

).

Switch the power tool on, place it onto the workpiece using
the guide 

(5)

 and slowly lower the bandsaw blade 

(6)

 into

the cut.
Work with moderate pressure and uniform feed.
Reduce the pressure just before ending the cut and slightly
raise the power tool, so that it does not fall on the work-
piece.

Maintenance and Service

Maintenance and Cleaning

u

Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage.

 There is risk of injury

from unintentionally pressing the on/off switch.

u

To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: 

www.bosch-pt.com

The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.
Power Tools 
Locked Bag 66 
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ: 
Phone: +61 3 95415555 
www.bosch-pt.com.au
www.bosch-pt.co.nz

Great Britain

Robert Bosch Ltd. (B.S.C.) 
P.O. Box 98 
Broadwater Park 
North Orbital Road 
Denham Uxbridge
UB 9 5HJ 
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair. 
Tel. Service: (0344) 7360109 
E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd. 
Unit 23 Magna Drive 
Magna Business Park 
City West 
Dublin 24 

Bosch Power Tools

1 609 92A 59J | (21.11.2019)