Bosch GCB 18V-63 (06012A0400) - Инструкция по эксплуатации - Страница 12

12

 | English

u

Remove any adjusting key or wrench before turning
the power tool on. 

 A wrench or a key left attached to a

rotating part of the power tool may result in personal in-
jury.

u

Do not overreach. Keep proper footing and balance at
all times. 

 This enables better control of the power tool in

unexpected situations.

u

Dress properly. Do not wear loose clothing or jew-
ellery. Keep your hair, clothing and gloves away from
moving parts. 

Loose clothes, jewellery or long hair can

be caught in moving parts.

u

If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. 

 Use of dust collection can re-

duce dust-related hazards.

Power tool use and care

u

Do not force the power tool. Use the correct power
tool for your application. 

 The correct power tool will do

the job better and safer at the rate for which it was de-
signed.

u

Do not use the power tool if the switch does not turn it
on and off. 

 Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

u

Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. 

 Such preventive safety measures reduce the risk

of starting the power tool accidentally.

u

Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. 

 Power

tools are dangerous in the hands of untrained users.

u

Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation.
If damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power
tools.

u

Keep cutting tools sharp and clean. 

 Properly main-

tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.

u

Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. 

 Use of the power tool for operations different

from those intended could result in a hazardous situation.

Battery tool use and care

u

Recharge only with the charger specified by the manu-
facturer. 

 A charger that is suitable for one type of bat-

tery pack may create a risk of fire when used with another
battery pack.

u

Use power tools only with specifically designated bat-
tery packs. 

 Use of any other battery packs may create a

risk of injury and fire.

u

When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another. 

Shorting the battery terminals together may cause burns
or a fire.

u

Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. 

 Liquid ejected from the bat-

tery may cause irritation or burns.

Service

u

Have your power tool serviced by a qualified repair
person using only identical replacement parts. 

This

will ensure that the safety of the power tool is maintained.

Safety Instructions for Band Saws

u

Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring. 

Cutting accessories contact-

ing a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an electric
shock.

u

Use clamps or another practical way to secure and
support the workpiece to a stable platform. 

Holding

the work by your hand or against the body leaves it un-
stable and may lead to loss of control.

u

Keep hands away from the sawing area. Do not reach
under the workpiece.

 Contact with the saw blade can

lead to injuries.

u

Only bring the power tool into contact with the work-
piece when switched on.

 Otherwise there is danger of

kickback if the cutting tool jams in the workpiece.

u

When the cut is completed, switch off the power tool
and then pull the band saw blade out of the cut only
after it has come to a standstill.

 In this manner you can

avoid kickback and can place down the power tool se-
curely.

u

Use only undamaged band-saw blades that are in per-
fect condition.

 Bent or dull band-saw blades can break

or lead to kickback.

u

Keep lubricants or oil away from the band-saw blade.
Completely wipe off excess oil before cutting.

 Other-

wise, the band-saw blade can slip.

u

Do not apply strong pressure to the band-saw blade
during operation.

 Excessive pressure can cause the

band-saw blade to slip or break. This poses a risk of in-
jury.

u

After switching off, do not stop the band-saw blade by
applying lateral pressure to it.

 The band-saw blade can

become damaged, break or lead to kickback.

u

Do not touch the band-saw blade directly after the
working process until after it has cooled down.

 The

band-saw blade becomes very hot while working.

1 609 92A 59J | (21.11.2019)

Bosch Power Tools