Smeg ALFA420EHT - Инструкция по эксплуатации - Страница 34

Cleaning and maintenance

82

2. The amount it is extracted can be 

adjusted by stopping whenever you hear 
a metallic click (total 4).

3. Press the button on the back of the spray 

head to dispense water.

4. To rewind the hose, pull the spray head 

slightly and guide it carefully into its 
housing.

5. Remove any residues manually and dry 

thoroughly.

6. After cleaning, we recommend that you 

run the appliance empty at 200°C for 
15-20 minutes in order to eliminate any 
residues.

Cleaning the core probe

After use, the temperature probe must be 
cleaned after it has cooled down. Only use 
water, neutral washing up detergent and a 
soft sponge to clean the metal part and the 
plastic handle of the temperature probe.
Do not under any circumstances wash it in a 
dishwasher, as it will damage the electronic 
components of the plug.
Dry thoroughly after cleaning.

Removing the tray support frames

Removing the tray support frames enables 
the sides to be cleaned more easily.
1. Unscrew the fastening ring nuts 

completely.

2. Remove the tray support frames from their 

seats on the deflector and remove them 
from the oven.

Use detergents that are specific for 
cleaning professional use ovens 
following the instructions on the 
package.

During cleaning, water may reach 
the front panel and the edge of the 
oven cavity. This is not hazardous 
and will not cause malfunctions.

Improper cleaning

Risk of damage to the probe

•  Do not wash the probe in a dishwasher.
•  Dry the entire probe thoroughly after 

washing it.