Oursson MO7053/DC - Инструкция по эксплуатации - Страница 7

7

•  Use potholders or oven gloves to take the 

product out of the oven.

•  While using the device do not slam the door, do not 

put trays or other objects on the door, avoid contact 
of cold water with the heated open door. Pic. A-1.

• 

If  while  preparing,  food  caught  on  fire  or  began  to 

emit smoke, turn off the device and unplug it. Do not 

open the door until fire is stopped, because the oxy

-

gen supply will intensify the flame. Do not pour water 

over the device, the glass may crack.

The operation of this device in any case does 
not imply application of any force to it, as this 
may damage the product due to user fault.

SETTING, 

Рiс. A-2

• 

 Place  the  device  on  a  flat  horizontal  heat  resistant 

surface, high from children’s reach, keeping the dis-
tance from walls/furniture as shown in the picture 
A-2.  One side must be completely free.

 It is forbid-

den to embed this device. 

•   Do not place the working device under/near cur-

tains  or  other  flammable  materials,  as  this  may 
cause a fire.

PRODUCT SET, 

Рiс. В

Body. ........................................................................ 1 pc.

1

 Enameled pan ..................................................... 1 pc.

2

 Grid ..................................................................... 1 pc.

3

 Handle for pan and grid ...................................... 1 pc.

4

 Handle for spit. .................................................... 1 pc.

5

 Spit ...................................................................... 1 pc.

6

 Tray for crumbs ................................................... 1 pc.

Instructions manual ................................................. 1 pc.
Warranty card .......................................................... 1 pc.

ELEMENTS OF DESIGN, 

Рiс. С-1

1

 Door handle

2

 Spit bracing 

3

 Slots for grid and pans

4

 Door

5

 Control panel

6

 Ventilation openings

7

 Operation indicator

8

 Removable tray for crumbs

Inner backlight, Pic. C-1-2
Upper and lower heating elements, Pic. C-1-1

UTILIZATION

Control panel, 

Рiс. С-2

Function switch,

 Рiс. С-2-4

•  STOP 

position, turns off the convection / spit 

operation

•  Convection (hot air circulation around the 

product)

•  Spit (spit rotates, uniformly browning on all sides)

•  Convection and spit

Temperature regulator, 

Рiс.С-2-1

•   Adjusting the temperature from 100°C to 

230°C

Р

Preparation mode switch, 

Рiс.С-2-2

•  STOP

 position

•  Upper heating element (upper heating)

•  Lower heating element (lower heating)

•  Upper and lower heating elements, simultaneous 

operation of both upper and lower heating 
elements

Timer, 

Рiс.С-2-3

•  Timer, time selection from 0 up to 60 minutes.

•  STOP 

position, utilized for stopping the cooking 

process. 

Spit construction, 

Рiс. С-5

1

 Hook

2

 Clamp

3

 Fastener

4

 Bayonet

5

 Motor coupling 

Preparation for operation

Before  first  use,

 wipe the body with a soft, dry cloth. 

Wash the other parts with warm water and detergent. 
Before assembling or disassembling the make sure that 
the device is unplugged. Thoroughly dry all parts.
Turn on the empty device for 15 minutes, set the maximum 
temperature of 230 °C in  , to remove the smell of a new 
device. Ventilate the room. Allow the device to cool. 

Order of operation, 

Рiс.C-2

1.  Make sure that the crumb tray is completely installed, 

and timer knob 

 is set in the 

. position. Plug in 

the device.