Taurus Sliding Care NonStop 2500 - Инструкция по эксплуатации - Страница 15

Ironing Temperature

Fabric and Type

Ironing Identification

(High temperature) 

180 - 200ºC

Cotton, linen and short fibre

(Medium temperature) 

140 - 160ºC

Silk, wool, nylon, long rayon 

and copper rayon

(Low temperature) 

80-120ºC

Propylene, polypropylene, 

polyurethane.

-

If no ironing instructions are 

indicated on the clothing care 

label, do not iron.

 - Note: to stop the clothing and ironing board 

from scorching, do not leave the nozzle in the 

same position for more than 30 seconds and 

when not in use, place the ironing head into its 

holder(Fig 14)

USE OF ACCESSORIES

 - 1 Use of clothing clip
 -

When ironing clothing that is hanging, fit the 

clothing clip into the collar hanging bracket, 

secure the clothing by moving the clips on both 

sides depending on the size of clothes to be 

ironed, and then iron the clothes. (Fig 15)

 - Hook insertion slot
 - Clamp the ironing board into it with the plane 

facing inwards

MAINTENANCE AND 

CLEANING

 - Shutdown and cooling
 - 1 Press and hold the power switch on the main 

body for 1 second, the main body “beeps” 

to indicate that the steamer is off, the power 

indicator lamp goes OFF, unplug the device 

and wait at least 30 minutes for the steamer to 

cool fully.

 - 2 Prolonged use of tap water often results in 

a build up of scale inside the steam chamber. 

The best way to reduce scale is to use filtered 

water, mineral water or distilled water, it is also 

advisable to descale the appliance at least 

twice per year.

 -

3 If it is not possible to use purified water, then 

scale can be reduced by doing following steps 

at least once per month:

 - A. Ensure the appliance is unplugged from the 

mains supply and completely cold.

 - B. Fill the water tank with a vinegar and water 

mixture, 1:2 proportion.

 - C. Plug in the appliance and allow it to heat 

up, turn on the steam switch and continuously 

spray steam for 5 minutes, then turn off the 

steam switch.

 - D. Empty any remaining mixture out of the 

water tank. Use fresh water to flush out any 

vinegar remaining in the tank until there is no 

smell of vinegar, then fill with clean water to 

reuse after 1 hour.

 - 4 Remove and empty the water tank, adjust 

the extendable rods to accommodate storage. 

(Fig 17)