Taurus Sliding Care NonStop 2500 - Инструкция по эксплуатации - Страница 14

 - 2. To avoid any risk of burns/scalding, do not 

adjust the angle if the device is still plugged in 

or immediately after use.

FUNCTIONAL CHARACTERISTICS

 - Safety pressure relief device (Fig 11)
 - Pressure relieve valve opening
 - When steam pressure in the heating body 

becomes too high, the safety pressure relief 

device on the base of the main body automati-

cally relieves pressure.

 - To avoid any risk of burns/scalding, pay atten-

tion when using the high-temperature steam 

spray.

PRE-HEATING AND STANDBY

-

0 seconds: Power on, pre-heating time 

starts: temperature setting 1: Approxima

-

tely 15 seconds. temperature setting 7: 

approximately 40 seconds

-

About 40 seconds: After finishing steam 

preheat for about 40 seconds, press the 

steam switch to enter into the steam iro-

ning operation mode.

-

About 1800 seconds: The machine automa

-

tically switches off after 30 minutes

OPERATION

 - Filling the water tank:
 -

Remove the water filler plug, pour about 1.2l 

water into the water tank, and refit the water 

filler plug, pressing tightly.

 - Tip: For maximum performance and a longer 

service life, it is best to use purified water. (Fig 

12)

 -

Purified water

 - Assemble

POWERING UP AND PRE-HEATING

 - 1 Switch on the power supply, the main body 

“beeps”.

 - 2 Press and hold the power switch on the main 

body for about 1 second to start the steamer, it 

“beeps” and the power light comes ON;

 - 3 After connecting the power supply, the 

indicator flashes, as shown in the diagram, (in

-

dicating the pre-heating process), this remains 

ON constantly after finishing the pre-heating 

process;

 - 4 Use the steam setting and temperature set-

ting switch to select the desired settings based 

on ironing needs

FOLDING THE IRONING BOARD 

(Fig 13)

 - Ironing clothes
 - 1 Steam ironing clothes (rotate the nozzle 90 

degrees)

 - Set the temperature to 200°C or 180°C, the 

steam ironing function cannot be used at any 

other temperature settings. The steam setting 

can be selected by the user as required, when 

the temperature indicator lamp stops flashing, 

press the steam button switch to steam iron. 

While ironing, use one hand to pull the clothes 

taut, and the other hand to hold the steamer, 

iron the clothes from top to bottom, several 

passes of the iron may be required for heavier 

garments.

 - 2 Dry ironing clothes
 - Select an appropriate temperature depending 

on the fabric to be ironed, place the fabric to be 

ironed onto the ironing board, use your hands 

to smooth out any initial creases and slowly pull 

the clothes taut and then iron slowly.

 - During ironing, start in a small area slowly wor-

king out to a larger area. Always iron according 

to different fabric and temperature instructions 

on the care label, or use cloth or towel placed 

over the garment when necessary.

 - 3 Ironing reference table