Philips PerfectCare 7000 PSG7014/10 - Инструкция по эксплуатации - Страница 7

9

Note: Be mindful on the heavy weight of the appliance when you tilt it. 
Warning: Do not use perfumed water, water from the tumble dryer, vinegar, starch, descaling agents, 

ironing aids, chemically descaled water or other chemicals, as they may cause water spitting, brown 

staining or damage to your appliance.

5 

Keep the EASY DECALC opening facing up, reinsert the EASY DECALC knob and turn it clockwise to 

fasten it (Fig. 21).

6 

Put the appliance back on a stable and even surface. Fill up the water tank halfway. Switch on the 

appliance and wait for 5 minutes. 

7 

Keep the steam trigger pressed continuously while you iron a few pieces of thick cloth in a back-and-

forth motion for 3 minutes (Fig. 22).

Warning: Hot, dirty water (about 100-150 ml) comes out of the soleplate.

8 

Stop cleaning when no more water comes out of the soleplate.

9 

You can continue to use the appliance immediately. Otherwise unplug the appliance after the descaling 

is completed.

Storage

1 

Switch off the appliance and unplug it.

Note: it is recommended to empty the water tank after every use.

2 

Place the iron on the iron platform and lock it by pushing the carry lock release button (Fig. 23).

3 

Let the appliance cool down completely.

4 

Fold the supply hose and wind the supply hose inside the supply hose storage compartment (Fig. 24).

5 

Fold the mains cord and fasten it with the Velcro strip.

6 

You can carry the appliance with one hand by the handle of the iron when the iron is locked on the iron 

platform.

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you are 

unable to solve the problem with the information below, visit 

www.philips.com/support

 for a list of 

frequently asked questions or contact the Consumer Care Center in your country.

Problem 

Cause 

Solution

Dirty water, brown stains 

or white flakes come out of 

the soleplate.

Scale has built up inside the 

appliance because it has not been 

descaled regularly.

Descale the appliance and the 

soleplate (see chapter ‘Cleaning and 

maintenance’).

You have put chemicals or additives 

in the water tank. 

Never use chemical or additives with 

the appliance. If you have already 

done so, follow the procedure in 

chapter ‘Cleaning and maintenance’ 

to remove the chemicals.

There is no or little steam.

The appliance has not heated up 

sufficiently.

Wait until the iron ready light stays 

on continuously. This takes approx. 2 

minutes. 

There is not enough water in the 

water tank.

Fill the water tank up to the MAX 

indication.

Scale has built up inside the 

appliance because it has not been 

descaled regularly.

Descale the appliance and soleplate 

(see chapter ‘Cleaning and 

maintenance’).

English