Philips GC7844/20 - Инструкция по эксплуатации - Страница 7

9

8 

As the Calc-Clean container becomes hot during the Calc-Clean process, wait approx. 5 minutes before you touch it. 
Then carry the Calc-Clean container to the sink, empty it and store it for future use (Fig. 24).

9 

If necessary, you can repeat steps 1 to 8. Make sure that you empty the Calc-Clean container before you start the Calc-
Clean process.
Note: During the Calc-Clean process, clean water may come out of the soleplate if no scale has accumulated inside 
the iron. This is normal.

For more information on how to carry out the Calc-Clean process, refer to the videos in this link: 
http://www.philips.com/descaling-iron.

Cleaning the soleplate

To properly maintain your appliance, clean it regularly.

1 

Clean the appliance with a moist cloth.

2 

To easily and effectively remove stains, let the soleplate heat up and move the iron over a moist cloth (Fig. 25).

Tip: Clean the soleplate regularly to ensure smooth gliding.

Storage

1 

Switch off the steam generator and unplug it.

2 

Pour the water out of the water tank into the sink (Fig. 26).

3 

Fold the water supply hose. Wind the water supply hose inside the water supply hose storage compartment and 
secure it inside the storage hook (Fig. 27).

4 

Fold the mains cord and fasten it with the Velcro strip (Fig. 28).

5 

Push the carry lock release button to lock the iron onto the iron platform (Fig. 29).

6 

You can carry the appliance with one hand by the handle of the iron when the iron is locked on the iron platform 
(Fig. 30).

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to 
solve the problem with the information below, visit

 www.philips.com/support 

for a list of frequently asked questions or 

contact the Consumer Care Center in your country.

Problem

Possible cause

Solution

The iron does not produce 
any steam.

There is not enough water in the 
water tank.

Fill the water tank beyond the MIN indication. Press 
and hold the steam trigger until steam comes out. It 
may take up to 30 seconds until steam comes out.

You did not press the steam 
trigger.

Press and hold the steam trigger until steam comes 
out.

The steam function has 
been disabled until you have 
performed the Calc-Clean 
process.

Perform the Calc-Clean process to restore the 
steam function. (see chapter ' Cleaning and 
maintenance')

At the start of your ironing 
session, the steam trigger has not 
been pressed long enough.

Press and hold the steam trigger until steam comes 
out. It may take up to 30 seconds until steam comes 
out.

The light of the CALC-CLEAN 
button flashes and the 
appliance beeps.

This is the Calc-Clean reminder.

Perform the Calc-Clean after the Calc-Clean 
reminder is given (see chapter 'Cleaning and 
maintenance').

English