Bort Comfort + - Инструкция по эксплуатации - Страница 7

7

into the tank that may damage the instrument . 

It is 

recommended to use distilled or filtered water

 .

•  Protect the appliance from rain . Do not store outside .
• 

QUICK REFERENCE

•  Stainless steel pole consists of four sections . Draw second 

section out, rotate along clockwise direction, and lock up . 
Its height can be fixed according to specific needs (1)

•  Unfold the hanger, install the hanger at the of the tel-

escopic pole (2)

•  Insert the pole to the ironing support fixing bush (3) (for 

Control +)

•  Insert the telescopic pole to pole interface, locked by a 

screw (4)

•  Insert steam pipe into steaming pipe interface, rotate 

along clockwise direction till it is tightly screwed (5)

•  Loss up the top buckles of ironing support, then fixed it 

at the bottom of the hanger, fix the down buckles to the 
ironing support fixing bush, lock it (6)

•  Take out water tank, open the lid, fill clean water into the 

tank . Note: Only cold water can be filled . Do not use hot 
water . To prolong garment steamers service life, purifier 
water is preferred (7)

•  Place water tank to its original position after the tank is 

filled with water (8)

•  Insert power line to the ac 220V240V socket (9)
•  Press foot switch for turn on steamer (10)
Turn on rotary switch, garment steamer will begin start 
work . (11) The switch have 4 level power, you can choose 
the steam which you like .

1 . Disinfection; 
2 . Chemical fiber polyester; 
3 . Cotton linen or light clothes; 
4 . Fur or heavy overcoat .

3

High temperature steam can soft clothes fiber, yet use 
steam spurting out from the sprayer alone cannot iron 
clothes thoroughly .
Thus, in order to iron clothes more efficiently, user shaft 
adopt pulling strength and flat . Product demonstration 
focus: Clutching clothes by hand and pulling it downward . 
Note: clothes surface shall be as flat as possible .

MAINTENANCE AND CARE

Always disconnect the mains plug and allow the steam 
cleaner to cool down before performing any maintenance 
work .

TROUBLESHOOTING

Often, failures have simple causes and you can do the 
troubleshooting yourself using the following overview . If 
you are in doubt or if the failure is not listed here please 
contact the authorized customer service .

Danger

Repair works may only be performed by the authorized 
customer service . Always disconnect the mains plug and 
allow the steam cleaner to cool down before performing 
any maintenance work .

DECREASED STEAM AMOUNT

Appliance is decalcifi ed .
Decalcify appliance .

ENVIRONMENTAL PROTECTION

The packaging material can be recycled . Please do not 
place the packaging into the ordinary refuse for disposal, 
but arrange for the proper recycling .

Made in China .