Bosch GSH 27 VC - Инструкция по эксплуатации - Страница 11

 English | 

11

Bosch Power Tools

1 609 92A 0FF | (9.12.13)



Hold power tool by insulated gripping surfaces, when 
performing an operation where the cutting accessory 
may contact hidden wiring or its own cord. 

Cutting ac-

cessory contacting a “live” wire may make exposed metal 
parts of the power tool “live” and could give the operator an 
electric shock.



Use suitable detectors to determine if utility lines are 
hidden in the work area or call the local utility company 
for assistance. 

Contact with electric lines can lead to fire 

and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or 
may cause an electric shock.



When working with the machine, always hold it firmly 
with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.



Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

Products sold in GB only

: Your product is fitted with a 

BS 1363/A approved electric plug with internal fuse (ASTA 
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be 
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should 
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible 
shock hazard and should never be inserted into a mains sock-
et elsewhere.

Products sold in AUS and NZ only

: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Product Description and Specifications

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for heavy chiselling and demolition 
work as well as for driving in and compacting with the appro-
priate accessories.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

On/Off switch

2

Handle (insulated gripping surface)

3

Tool retainer

4

Tool holder

5

Tool shank

6

Shoulder

Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can 
be found in our accessories program.

Technical Data

Noise/Vibration Information

Measured sound values determined according to EN 60745.

Typically the A-weighted noise levels of the product are: 
Sound pressure level 94 dB(A); sound power level 
105 dB(A).  Uncertainty  K = 3 dB.

Wear hearing protection!

Vibration total values a

h

 (triax vector sum) and uncertainty K 

determined according to EN 60745:
Chiselling: a

h

= 8.5 m/s

2

, K = 1.5 m/s

2

.

The vibration level given in this information sheet has been 
measured in accordance with a standardised test given in 
EN 60745 and may be used to compare one tool with another. 
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different 
applications, with different accessories or insertion tools or is 
poorly maintained, the vibration emission may differ. This may 
significantly increase the exposure level over the total working 
period.
An estimation of the level of exposure to vibration should also 
take into account the times when the tool is switched off or 
when it is running but not actually doing the job. This may signif-
icantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator 
from the effects of vibration such as: maintain the tool and the 
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745 
according to the provisions of the directives 2011/65/EU, 
2004 / 108 / EC, 2006/42/EC, 2000 / 14 / EC.
2000 / 14 / EC: Guaranteed sound power level 108 dB(A). 
Conformity assessment procedure according to Annex VI.

Equipment category: 10

Demolition Hammer

GSH 27 VC

Article number

3 611 C0A 0..

Rated power input

W

2 000

Impact rate

min

-1

1 000

Impact energy per stroke according 
to EPTA-Procedure 05/2009

J

62

Tool holder

mm

28

Weight according to 
EPTA-Procedure 01/2003

kg

29.5

Protection class

/

II

The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.

Starting cycles generate brief voltage drops. Interference with other 
equipment/machines may occur in case of unfavourable mains system 
conditions. Malfunctions are not to be expected for system impedances 
below 0,36 ohm.

OBJ_BUCH-1144-006.book  Page 11  Monday, December 9, 2013  1:27 PM