Timberk TAP FL70 SF - Инструкция по эксплуатации - Страница 3

www.timberk.com • electric air purifier

3

The appliance should be monitored during its operation, especially when 
close to him are the children. The device is not intended for use by persons 
(Including children) with reduced physical, sensory or mental capabilities, 
having insufficient experience and knowledge, unless they are supervised 
and do not receive instructions on how to use the device from the person 
responsible for their safety. Make sure that the children do not play with 
the device.

Do not use the device in order not provided for this manual.

Not allowed to operate the appliance if the power cord or plug are 
damaged, and if air cleaner is defective, damaged in the fall or in other 
circumstances. 

The device should be used only in fully assembled form.

To avoid electrical hazards, damaged power cord must be changed only at 
authorized service centers by qualified personnel.

To avoid electric shock, do not place the power cord near a heat source 
and flammable or combustible substances.

To avoid personal injury and property damage, not try to repair the air 
cleaner.

For repair of the air purifier, please contact the authorized service center of 
the manufacturer. Its address can be obtained at www.timberk.com.

Remove the plug from the outlet device in the following cases: before 
cleaning and maintenance, before moving to another place.

Install the air cleaner on a flat dry surface.

For damages received due to improper location of the humidifier, a 
manufacturer and seller are not liable.

When not in use, unplug the power supply.

Do not route power cord under a carpet or other items.

Avoid contact with air filter foreign objects.

Do not block air intake with foreign objects and the air outlet.

The minimum distance from any of the instrument to objects and surfaces, 
30 cm.

Do not sit, or stand or place heavy objects on the air purifier.

For damage to the instrument, derived from the non-fulfillment of this 
requirement, a manufacturer and seller are not liable.

When you disconnect the unit from the mains, do not pull the power cable 
and do not touch it with wet hands.

3. SPECIFICATION

Table 1

Specifications

Unit of

measurement

TAP FL70 SF (BL)

TAP FL70 SF (W)

Air flow 

m

3

/h

80

Power supply

V/Hz

220~/50

Power consumption

W

3.3

Operating voltage of the device (DC)   

A

12

Rated current

A

0.015

Noice level

dB

50

Water protection

-

IPX0

Electrical protection class

-

Сlass ll

Net weight

kg

1,15

Device dimension

mm

230x150x335

IMPORTANT! 

The manufacturer reserves the right to change the 
set-list of the device (including liquid and powder 
components) for different supplies without prior 
notice. The changes either in no way influence the 
basic technical parameters of the device or may 
improve them, and also not violate the legislation or 
quality standards of the countries of manufacture, 
transit and selling.
The changes in the set-list may result in changing 
of the weight and dimensions of the device, but not 
more than by +\- 5-20% (depending on the product 
category)