BRAYER BR4901 - Инструкция по эксплуатации - Страница 11

11

EN

•  Press the clamp of the water tank (9), and pull it 

towards you, at an angle of 45 °, remove the tank (9) 

from the air purifier body (pic. 9).

•  Unscrew the water tank (9) lid by turning it 

counterclockwise, fill the water tank (9) with water, 

make sure that the lid sealing gasket is in place and 

screw the lid back on by turning it clockwise (pic. 10). 

Do not apply excessive efforts when screwing the lid.

Note:

 avoid the appearance of «white bloom» on 

the interior objects, it is recommended to use boiled 

and settled water, water that has been purified with a 

domestic filter or distilled water.

•  Place the water tank (9) at a 45° angle and install it in 

the air humidifier body (pic. 11).

• 

To switch the humidifier on, press the button (13) «

 Humidifier» on the control/indication panel (1) or 

the button (30) «  Humidifier» on the remote control 

(33), the digital symbols (21) will show the relative 

humidity in the room, and the symbol (23) «

MIST

» will show the humidity intensity. You can change 

the humidity intensity level by pressing the button 

(13) «  Humidifier» on the control/indication panel 

(1) or the button (30) « Humidifier» on the remote 

control (33).

• 

To switch the humidity mode off, press the button (13) 
«  Humidifier» on the control/indication panel (1) or 

the button (30) «  Humidifier» on the remote control 

(33) until the symbol (23) «

MIST

» goes out.

Note:

 when or if the water tank (9) is empty, you will 

hear sound signals, and the air cleanness indicator (2) 

will be flashing red.

•  If you do not plan to use the humidifying function, 

drain the water from the process chamber of the 

humidifier. Switch the air purifier off, place a suitable 

container under the drain plug (10), remove the plug 

(10) (pic. 12), drain the water, install the plug (10) 

back to its place.

Automatic operation mode

•  To switch the automatic mode on, press the button 

(14) «

 Automatic» on the control/indication panel 

(1) or press the button (31) «

 Automatic» on the 

remote control (33), the symbol (19) «

AUTO

» will 

light up.

In the automatic operation mode: 

 - the ionization mode will switch on and the symbol 

(19) «

ANION

» will light up;

 -

the UV lamp will switch on and the symbol (19) «

STERILIZE

» will light up;

 - the speed operation mode is indicated with the 

symbol (24) «

SPEED

» and depends on the air 

cleanness level in the room;

 -

the operating intensity of the humidifier is indicated 

by the symbol (23) «

MIST

» and depends on 

the relative humidity in the room.