Timberk TFH T20MDR - Инструкция по эксплуатации - Страница 4

www.timberk.com • Electric metal ceramic fan heater 

4

Operating conditions

1. Do not install the unit on uneven or unstable surfaces
2. To avoid electric shock, do not insert or remove the power cord plug with 

wet hands h, otherwise it may cause harm to your health

3. For normal operation of the device voltage level should be sufficient for 

consistency with the stated technical parameters on the device.

4. The device must be installed vertically
5. Do not operate the heater indoor relative humidity above 93%; with a 

potentially explosive atmosphere; very dusty environment; with medium 

corrosive metals

IMPORTANT! 

The manufacturer reserves the right to change the set-list of the 

device (including liquid and powder components) for different 

supplies without prior notice. The changes either in no way influence 

the basic technical parameters of the device or may improve them, 

and also not violate the legislation or quality standards of the 

countries of manufacture, transit and selling.
The changes in the set-list may result in changing of the weight 

and dimensions of the device, but not more than by +\- 5-20% 

(depending on the product category)

IMPORTANT! 

Never use the unit in a horizontal or inclined position

ATTENTION! 

After transporting the unit heater at temperatures below the workers 

to leave the device indoors where it is supposed to operate without 

plugging in at least 2 hours

4. DESCRIPTION OF FAN HEATER

5. DELIVERY SET

Fig. 1

1. Heating element
2. Venting protective grille
3. Handle for moving
4. Body of the device
5. Rubber feet
6. Air intake grille
7. Motor with fan
8. Power cord
9. Switcher
10. Thermostat handle
11. Plug

1. Fan heater – 1pc
2. Manual instruction and warranty card  – 1pc
3. Packing – 1pc

For a detailed description of technical parameters and characteristics go to www.timberk.com 

or contact TIMBERK  official dealers.