Timberk TFH T20MDR - Инструкция по эксплуатации - Страница 2

www.timberk.com • Electric metal ceramic fan heater 

2

Dear customer!!

Thank you for good choice and purchase of Timberk electric fan 

heater. It will serve you for a long time.

Timberk electric fan heater is designed to heat and create a 

comfortable environment indoors during cold season. The fan 

heater can be installed only in a vertically on a rigid foundation, 

where there is possible to connect to 220-240V~, 50Hz single-

phase power supply wiring. 

The heater based on a standard metal ceramic heating 

element is convenient and easy-to-install, economical in use 

in connection with minimum energy losses, increased heat 

exchange and effective distribution of the air flow.

Please, read this operation manual carefully prior to assembly 

and use of the product.

Please, read this manual carefully before use of the convector heater.
This manual contains important information regarding your safety, as well 

as recommendations concerning the correct use and maintenance of this 

appliance.
Keep this manual with a guarantee slip, cash register receipt and, if 

possible, carton and packaging material.
The convector heater you have bought may slightly differ from that 

described in the manual, but it does not affect its use and operation 

procedures.

When using the convector heater several safety precautions should be followed. 

Incorrect operation due to disregard to precautions may cause harm to health of 

the user and other persons, as well as damage to their property.
1. Read all the instructions before using the fan heater.
2. To avoid the risk of electric shock always unplug the appliance when not in 

use. Remember that there is a small risk of electric shock from static electricity, 

even when the appliance is turned off.

3. Never use the unit in a situation where it may come into contact with water. Do 

not connect the device to the network, if the surface is wet.

4. Any appliance must be monitored, especially if far from it are children.
5. Unplug the power cord from the mains before cleaning to make preventive.
6. To turn off, set the power switch to «O» and unplug the power cord from the 

wall outlet.

7. Keep the appliance cool or warm place.
8. Appliance plug must fit into a standard outlet to enter it without effort. If the 

plug does not fit into the outlet or walks tight, turn the fork 180 degrees. If the 

plug is not inserted as before, call your electrician to replace the outlet. Never 

use the appliance if the plug into an outlet not put through.

9. If the power cord is damaged repairs should be performed only by a qualified 

IMPORTANT!

Important safeguards and instructions contained in 

this manual do not include all possible modes and 

situations. It is necessary to understand that common 

sense, caution and accuracy are factors, which cannot 

be ‘built-in’ any product.
These factors should be considered by a person, who 

is interested in the proper operation of the appliance. 

The manufacturer is no responsible for damage of the 

appliance or its parts during transportation, as a result 

of incorrect installation or voltage fluctuations, as well 

as when any part of the appliance has been changed 

or modified.

1. IMPORTANT INFORMATION

2. PRECAUTIONS