Обогреватели Timberk T-GS4-G10 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
IM2022
26
Faulty drop sensor
Contact an authorized service
center
Ignition burner burns unevenly,
the flame breaks off the base and
goes out when the gas
adjustment knob is released
Low quality gas is used
Use high quality gas
Gas reducer is defective - gas
pressure is too high or low
Contact an authorized service
center
Strong flame on a ceramic burner
Gas reducer is defective - gas
pressure is too high
Contact an authorized service
center
12. UTILIZATION RULES
After the lifetime of the device expires, it should be recycled in compliance with the laws, rules and methods
in region of recycling. Detailed information about the recycling of the device, you can receive from a
representative of the local authorities, after providing full information about the device. The manufacturer and
authorized organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the
requirements of legislation on utilization and methods of utilization of the device selected by the Buyer. The
lifetime of the device is indicated in the warranty card. Warranty period for the device and warranty terms are
specified in the warranty card. The warranty card is an integral part of the documentation supplied with t his
unit. If there is no warranty card in the delivery set, ask for it from the Seller. The warranty card provided by
the Seller must conform to the manufacturer’s form.
The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible
harm which can be caused to people, animals or property directly or indirectly, if this harm occurred as a
result of noncompliance with the rules and operating conditions, installation of the device, intentional or
reckless actions of the user- and / or third parties, as well as in situations caused by natural and / or
anthropogenic accidents.
13. TRANSPORTATION AND STORAGE
1. During transportation, any possible impacts and movements of the package inside the vehicle should be
excluded.
2. Transporting and storage should be provided in strict accordance to the manipulation marks.
Temperature
Requirements*
Transportation
and storage
From -
30°C up to +50°C
Humidity
Requirements*
From 15% up to 85%
(without condensate)
We are exploring new technologies and we constantly improving the quality of our products. That’s why
specifications, design and accessories are subject to change without any specific notice.
* This product must have storage in dry, well-ventilated space of warehouse at the temperature not lower
than +5°C
