Обогреватели Scarlett SCA H VER31 2000 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
IM2022
19
1. Housing
2. Support legs
3. Power cord with plug
4. Control panel
5. Air intake grate
6. Air outlet grate
6.
DELIVERY SET
1. Electric convector - 1 pc.
2. Supporting feet - 2 pcs.
3.
Wall mounting set
– 1 set
4. Fixing screws set
– 1 set
5. Instruction manual - 1 pc.
6. Warranty card - 1 pc.
7. Packing of the device - 1 pc.
7.
ASSEMBLY AND INSTALLATION
The convector is equipped with feet for installation on the floor and a wall mounting kit
for installation on the wall.
Connecting feet to the convector
1. Before using the convector, remove the set of feet and fixing screws
from the
package. Install the feet on the bottom of the convector. Fix the feet with screws,
screwing them through special holes to the bottom panel.
2. Install the convector on the floor and make sure it is stable.
Wall installation of the device
1. Measure the distance between the slots on the back of the device (see Fig. 2A)
2. Drill holes in the wall according to the slots on the back panel of the device and the
mounting plates (see Figure 2B), providing a height from the floor to the bottom of the
convector of at least 120 mm.
3. Set in the drilled holes and using machine screws to fasten the wall mounting plate
(see Fig. 2B).
4. To turn the heater and using machine screws to fasten it to the bottom of the
mounting plate (see Fig. 2C).
5. Hang the heater on the wall-mounted mounting plate, aligning the slots in the
mounting plate with the slots on the rear panel of the instrument, and he followed her
into the wall mounting plate on the bottom of the device.
