Обогреватели Scarlett SCA H VER31 2000 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
IM2022
22
Turn the thermostat knob clockwise until it stops. W hen the room temperature reaches
the desired level, turn the thermostat knob counterclockwise until the appliance is
switched off, and you will hear the click. The thermostat will maintain the set
temperature, periodically turning on and off the convector.
In cold weather, the convector may not fully cope with the heating of the room. In this
case, set the thermostat knob to a level slightly higher than desired.
Switching off
Set the keys of the heating power mode switch to the "0" position and disconnect the
appliance from the electrical network.
9.
CLEANING AND MAINTENANCE OF THE UNIT
The external body of the device must be regularly cleaned from dust and dirt, because
this affects the efficiency of its work.
Before cleaning, turn off the device and unplug it from the network, let it cool, then wipe
its body with a soft, slightly damp cloth. Then wipe it dry and allow the device to dry
completely. It is not recommended to use detergents, including detergents with
abrasive compounds to clean the body of the device. Do not damage the appliance
with sharp objects, because scratches on paint can cause rust.
The rear side of the convector must also be periodically cleaned from dust and dirt. To
do this, disconnect the device from the brackets, and after cleaning, put it back on the
brackets.
Cleaning should be carried out periodically to maintain the technical condition of the
convector and preserve its appearance for many years.
NOTE:
A change in the color of enamel on the front side is not a defect, but is a consequence
of operation of the device in a room with a big amount of dust particles and other
contaminants in the air.
10. STORAGE
Make sure that the appliance body and its heating element have cooled down before
the appliance is dismantled and packed in its packaging for long-term storage.
Complete all requirements of chapter CLEAN AND CARE.
Reel on the power cord.
When the device is not in use for a long time, store it in a cool, dry place in the original
cardboard box.
