FIRST 1000Вт / 2000Вт, FA-5571-8-RE - Инструкция по эксплуатации - Страница 2

NAME OF THE COMPONENTS 

(see picture 1):

1)  cOVER  

2)  Wind inlEt  

3)  WIND OUTLET

4)   FannER 

5)   BasE 

6)  cOntROl panEl

INSTALLATION 

(see picture 2):

drill two holes into the wall and keep a distance of 1.8m from the ground. the diameter of the 

hole just contains the inflated plastic pipe. after tucking the inflated plastic pipe, fix pothook on 

the pipe with screws. Make sure pothook are safely placed and hang the heater. the clip under 

the pothook should be inserted rabbet of the heater bottom.

CLEANING AND MAINTENANCE

1.    If you don’t use the heater for a long time, please wipe the surface and put it into the box. 

lay the carton on a ventilated and dry place. humidity and pressure on the carton can 

damage your product.

2.    Wait for the machine to cool down before pulling out the plug, then clean it. Wipe it clean 

with a wet washcloth or cleaner. never directly wash with water, do not drop water into the 

machine. never clean with acids, chemical thinner, gasoline, benzene etc. 

3.    Before every use, please check to make sure that the outlet ventilation has no sundries.

FUNCTION INSTRUCTION
MACHINE PANEL

�

plug cord into the electric outlet, press “

�

”, wind window will open and blow out natural wind. 

secondly press “

�

” is Power off, and the blue light shining, 30 seconds later, it will stop working 

automaticly.

When heater on working, press first time is 1000W, second time is 2000W. it is circle use.

When heater on working, press this button. the fin will automatic swing up and down.

◴

setting the heater working hours.

1h – 2.0h – 3.0h – 4.0h – 5.0h – 6.0h – 7.0h – 8.0h

3

ENGLISH

2

ENGLISH

INSTRUCTION MANUAL

WALL MOUNTED PTC FAN HEATER USAGE GUIDANCE 

•   Please read this guidance carefully before using your wall mounted PTC heater, so that you 

can use it correctly.

•  Please keep well with this guidance.

BRIEF INTRODUCTION OF THE PRODUCT 

ptc heater has a heating and fan function in the same machine, and it looks like an air 

conditioner with latest design. With remote control make it to be operated easily and safely, the 

machine adopts ptc heating material heating it quickly, it's durable and without flame.

FEATURE:

•   PTC  ceramic  heater  elements,  high  efficiency  heating,  quickly  heating,  noise-less  odor-

free, non-polluting, no flame and will not killing the oxygen

•  Wall mounted 

•  Cool,warm or hot wind

•  Automatic oscillating louvers

•  LCD

•  8 hours timer

•  Remote control

•  Overheat protection

NOTES:

1.    the heater should be hung on the wall and the wind outlet should face down or be placed 

on flat appliance. You must not place it precipitantly or tipsily.

2.    Please do not use the heater in places full of combustible or explosive gas. Don’t cover the 

wind outlet.

3.    If the supply cord is damaged, it must be replaced by the manufacturer or its service agent 

or a similarly qualified person in order to avoid a hazard 

4.    if nobody is in or you are repairing the heater, please disconnect the heater from electric outlet.

5.  Please don’t touch the heater with wet hands or other conductors.

6.  Motor is out of order, please make it stop immediately.

7.   during use, please do not open the door or window otherwise it will diminish the heating 

effect.

8.   to turn off the machine, press the on/off switch to off, then the machine will keep the fan 

working about 30 seconds until it blows out cool wind, then the machine will stop working 

and you can take out the plug.

9.   Must hang the heater on the wall and fix it away from water in bathroom.

10.   Remote control, please use 1x cR2025 battery.

11.  if the product needs repair, please ask experts or our company authorized maintenance 

department.

12.  this appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they 

have been given supervision or instruction concerning use of the appliance by a person 

responsible for their safety.

13.  Children should be supervised to ensure that they do not play with the appliance.

WARNING:

Don’t touch the working machine and don’t cover the wind outlet and inlet!