Monster iSport In-Ear Black (128660-00) - Инструкция по эксплуатации - Страница 7

Basic operation

Charge the Battery

Your iSport® Wireless initially has enough power to 

complete the pairing and a few calls. When battery 
is low, you will hear “Battery low” around every 5 
minutes and “Recharge” when the battery needs 
to be recharged and the indicator light changes 
to red. The headphone includes a Micro USB cable 
that can be connected to your computer or other 
device made for USB charging. Plug the Micro USB 
end of the included USB cable into the USB micro 
port charger connector on the right channel side 
of the headphone. Plug the other end into a USB 
port on your computer or other devices made for 
USB charging. The indicator light will be red while 
charging. Once fully charged, the indicator light 
will be blue. Charge time is approximately 1.5 hours 
on an empty battery. 

Note:

 The lifetime of the battery will be significantly 

reduced if your headphone is left uncharged for a 
long period. We recommend that you recharge your 
headphone at least once a month. 

Power On/ Power Off

Press the Multifunction button for about 1-2 
seconds to power on the headphone. To power off 

the headphone, press the Multifunction button for 
about 3-5 seconds.

Volume Control

Press the Volume “+” or “-” to turn volume up 
or down, you hear beep once you reach the 
maximum volume. 

Pairing

Pair One Phone

1. 

Press and hold the Multifunction button for 
about 5 seconds until indicator light flashes 
blue and red alternately, you hear “Power 
on” then “Pairing”. Now headphone is in 
pairing mode.

2. 

Activate 

Bluetooth®

 on your phone and set it 

to search for new devices. 

3. 

Select “iSport Wireless”. If your phone asks, 
enter 0000 (four zeros) for the passcode or 
accept the connection. The indicator light 
stops flashing red and blue once successfully 
paired, you hear “Connection successful”. 
Some phone list an option to “Play through 
earphone”, select to use the headphone.

ENGLISH