Настольные часы VITEK VT-6607 GY - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ENGLISH
8
•
Press the ««MEM/M+/NAP/
»
button (10) again to save the
selected settings.
•
Repeat the previous steps for all
radio stations the frequencies of
which you wish to save in the clock
radio memory.
•
To select one of the pre-pro-
grammed radio stations, press the
«MEM/M+/NAP/
» button (10)
consequently in the radio mode.
Automatic radio switch off
You can set the radio switch-off time.
•
Press the «SNOOZE/SLEEP/
DIMMER/DST» button (11) in the
radio mode. The «90» symbols will
appear on the display, that means
automatic radio switching off in
90 minutes.
•
Set the necessary auto switch-
off time (90, 60, 30 or 15 min-
utes) by pressing the «SNOOZE/
SLEEP/DIMMER/DST» button (11)
repeatedly.
•
To cancel this function, press the
SNOOZE/SLEEP/DIMMER/DST»
button (11) repeatedly until the
«OFF» symbol appears or switch
the radio off by pressing the button
(16) «
/ALARM OFF».
Display auto switch-off
•
To activate the function, press
and hold down the
►►
/«DISPLAY
AUTO OFF» display switch-off but-
ton while in the current time mode
until the indicator (3) appears on
the display (1). The display (1)
will be automatically switched off
15 seconds after any button is
pressed.
Note: The function is inactive in the
radio mode.
•
To switch the function off, press
and hold down the
►►
/«DISPLAY
AUTO OFF» display switch-off but-
ton (14) again, the indicator (3)
will go out.
Countdown timer
•
Press the «MEM/M+/NAP/
»
button (10) in the current time
mode, the «n90» symbol will
appear on the display, that means
the countdown timer will be actu-
ated in 90 minutes.
•
Set the timer actuation time from
10 to 90 minutes with a 10 minute
step by pressing the «MEM/M+/
NAP/
» button (10) repeatedly.
•
To view the remaining time, press
the «MEM/M+/NAP/
» button
(10) once.
•
After the set time runs out, you
will hear a sound signal, to switch
it off, press the button (16)
«
/ALARM OFF».
•
To cancel this function, press the
«NAP/M+/MEM/
» button (10)
repeatedly until the «OFF» symbol
appears on the display or switch
the radio on by pressing the button
(16) «
/ALARM OFF».
Image projection
The clock radio has a projector that
allows to show the current time, for
example, on the ceiling. With manual
focusing you can get a sharp image, and
the variable projector tilt angle enables
to choose a place for projection.
To project the image, turn the projec-
tor in the necessary direction. Switch
VT-6607.indd 8
20.10.2014 9:54:19
