Настольные часы VITEK VT-6607 GY - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ENGLISH
7
Notes:
–
If the buttons (15) «
◄◄
» or (14)
«
►►
» are not pressed within
30 seconds during the alarm set-
ting, the current time will be shown
on the display (1).
–
The alarm actuation is only pos-
sible when the unit is connected
to the mains.
Switching the alarms on/off
•
To switch the alarm (alarms) on,
press and hold down the button
(13) «
» and/or (12) «
» in the
current time mode until the cor-
responding indicators «AL1» (4) or
«AL2» (7) appear on the display.
•
To switch the alarm (alarms) off,
press and hold down the button (13)
«
» and/or (12) «
» in the cur-
rent time mode. The corresponding
alarm indicator will go out.
Snooze
•
You can switch the alarm signal
off for 9 minutes by pressing the
«SNOOZE/SLEEP/DIMMER/DST»
button (11).
•
The selected alarm indicator
(4 or 7) will be blinking, the alarm
signal will be repeated in 9 mi-
nutes.
•
To switch the alarm sound sig-
nal off, press the button (16) «
/
ALARM OFF».
Note: The alarm/radio signals will
sound during 30 minutes if you do not
press any buttons.
Display brightness setup
•
Set up the necessary display
(1) brightness by pressing the
«SNOOZE/SLEEP/DIMMER/DST»
button (11) repeatedly in the cur-
rent time mode.
Radio stations reception
•
Connect the unit to the mains and
press the button (16) «
/ALARM
OFF».
•
Use the buttons (15) «
◄◄
» and
(14) «
►►
» for tuning in to the
desired radio station frequency.
Manual tuning:
press the buttons
(15) «
◄◄
» и (14) «
►►
» consequently
to select the desired radio station with
0.1 MHz step in the FM mode.
Auto tuning:
press and hold down the
button (15) «
◄◄
» or (14) «
►►
» for
more than 2 seconds. The tuner begins
scanning and automatically holds after
receiving a strong radio station signal.
•
Press the button (16) «
/ALARM
OFF» to switch the radio off.
Antenna (17)
Select the antenna (17) position for the
best radio station reception.
Volume level adjusting
Use buttons (12) and (13) to set the
desired volume level.
Radio stations programming
You can set up and save settings for
10 radio stations in FM range.
•
Tune in to the radio station you
want to program.
•
Press and hold down the «MEM/
M+/NAP/
» button (10) until the
blinking «Р01» symbol appears.
•
Press the buttons (15) «
◄◄
» and
(14) «
►►
» consequently to select
the program cell number.
VT-6607.indd 7
20.10.2014 9:54:19
