Настольные часы VITEK VT-6607 GY - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ENGLISH
6
Sequential displaying mode
You can switch on sequential displaying
of current time, year and current date.
•
To activate this function in the time
mode (the radio is off), press and
hold down the «
◄◄
/Y-M-D/
D
»
button (15) until the symbol «On»
appears on the display.
•
To switch the sequential display-
ing mode off, press and hold down
the «
◄◄
/Y-M-D/
D
» button (15)
until the symbol «OFF» appears on
the display.
Setting the clock to summer time
and vice versa
•
In the current time mode, press
and hold down the «SNOOZE/
SLEEP/DIMMER/DST» button (11)
until the current time indication
changes by one hour.
Alarm setup (AL.1 and AL.2)
•
To view the first alarm settings,
press the button (13) «
» while in
the current time mode.
•
In the alarm settings viewing mode,
press and hold down the button
(13) «
» again. Blinking hour digits
will be shown on the display.
•
Use the buttons (15) «
◄◄
» and (14)
«
►►
» to select the necessary hour.
•
Press the button (13) «
». The
blinking minute digits will be
shown on the display.
•
Use the buttons (15) «
◄◄
» and
(14) «
►►
» to select the neces-
sary minutes.
•
Press the button (13) «
».
Blinking symbols of the alarm
repeating modes will appear on
the display. Use the buttons (15)
«
◄◄
» and (14) «
►►
» to select the
necessary mode:
1-1 without repeating;
1-5 alarm signal repeating from
Monday to Friday;
1-7 alarm signal repeating seven
days a week;
6-7 alarm signal repeating on
Saturday and Sunday.
•
Press the button (13) «
». If you
have set the alarm signal without
repeating (1-1), digital indication
of the day of the week (1, 2, …6, 7)
for alarm actuation will appear on
the display. Using the buttons (15)
«
◄◄
» and (14) «
►►
», set the day
(1 - Monday, 2 - Tuesday etc.) for
alarm actuation.
•
Press the button (13) «
».
The blinking symbol of the alarm
signal type will be shown on the
display. Use the buttons (15)
«
◄◄
» and (14) «
►►
» to select
the necessary signal type: sound
signal («bu» symbol) or radio
(radio receiver’s tuned frequency
is displayed).
•
If you have selected “radio” as an
alarm signal, press the button (13)
«
», the alarm volume level sym-
bol (from 1 to 15) will start blinking
on the display. Using the buttons
(15) «
◄◄
» and (14) «
►►
», set the
desired volume level.
Note: If you want to select the radio as
an alarm signal, tune in to a required
radio station preliminarily (see “Radio
stations reception”).
•
To finish setting the first alarm,
press the button (13) «
».
•
Repeat the above steps for the
second alarm (12) «
».
VT-6607.indd 6
20.10.2014 9:54:19
