AL-KO HW 4500 FCS COMFORT - Инструкция по эксплуатации - Страница 19

Насосы AL-KO HW 4500 FCS COMFORT - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 188
Загружаем инструкцию
background image

Warranty

467 776_a

19

Switching condi-

tion

LED display

Function description/actions

Normal operation mode

Pump switches on

and starts to draw

water. Pump fills

the tank with out-

let closed.

LED display PUMP ON lights up. LED

display FLOW CONTROL flashes.

Initial commissioning

 Pump filled

with water, suction and pressure side

connected, water present on the suc-

tion side. Pump connected to mains.

Pump runnig.

LED display PUMP ON lights up.

Pump delivering water. Water is being

drawn off on the pressure side.

Pump switches

off via pressure

switch.

LED displays off.

Pump achieving the set pressure

Fault message

Pump switches

off via electronics

(dry running pro-

tection).

LED display ALARM is flashing.

Check all screwed fittings, the suc-

tion line and filter glass and press the

RESET button if necessary. Back to in-

itial commissioning until the pump deli-

vers water.

Alarm dry running:

This message appears if, for a defined

period, (approx. 90 seconds) there is

no flow and pressure is not built up.

Reset using the RESET button.

WARRANTY

If any material or manufacturing defects are found during the statutory customer protection period, we

will either repair or replace the equipment, whichever we consider the more appropriate. This statutory

period may vary according to the legislation in force in the country where the equipment was purchased.
Our warranty is valid only if:

The equipment has been used properly
The operating instructions have been followed
Genuine replacement parts have been used

The warranty is no longer valid if:

The equipment has been tampered with
Technical modifications have been made
The  equipment  was  not  used  for  its  intended

purpose

The following are not covered by warranty:

Paint damage due to normal wear
Wear parts identified by a border 

[

xxx xxx (x)

]

 on the spare parts list

Combustion motors (these are covered by a separate warranty from the manufacturer concerned)

The warranty period begins on the purchase by the first end user. Decisive is the date on the receipt.

To  make  a  claim  under  warranty,  please  take  this  statement  of  warranty  and  proof  of  purchase  to  the

nearest authorised customer service centre. This warranty does not affect the usual statutory rights of

the customer relative to the seller.

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к AL-KO HW 4500 FCS COMFORT?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"