Unit UGR-465 - Инструкция по эксплуатации - Страница 22

22

Meat grinder  |  UGR-465 / UGR-466

ENGLISH

CLEANING AND CARE

Clean the meat grinder after each use.  
Clean the meat grinder immediately after finishing work with it.
Before disassembling and cleaning the meat grinder, turn it off using the mode 

switch, and then unplug it. Unscrew the fixing ring and remove all attachments 

from the snake and remove the snake from the head. Press the lock button and 

remove it. Remove the pusher and the hopper plate.
Wash all the parts that come into contact with the products with running water 

using mild detergents. Then rinse them with clean hot water and immediately 

wipe dry. It is recommended to grease the knife and grilles with vegetable oil. 

Attention: the parts of the meat grinder should not be washed in the 

dishwasher. Store the meat grinder in a cool dry place.

Unclogging

1.  If the meat stuck in the head during the operation, turn off the meat grinder 

by pressing [POWER] – the engine should stop working.

2.  Then turn the button [REV] – the snake will rotate in the opposite direction 

while the button is pressed and the clog will be eliminated.  

After removing the blockage, you can continue working as usual. If the blockage 

is not eliminated, disconnect the grinder from the mains, disassemble it and 

remove the clog by your hands.