Мясорубки Kenwood PG520 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
safety
●
Always ensure bones and rind etc
are removed from the meat before
mincing.
●
When mincing nuts only feed a few
down at a time and allow the scroll
to pick them up before adding any
more.
●
Always unplug:
●
●
before fitting or removing parts
●
●
after use
●
●
before cleaning.
●
Always use the pusher supplied.
Never put your fingers or utensils in
the feed tube.
●
Warning - the cutting blade is sharp,
handle with care both in use and
cleaning.
●
Ensure the attachment is secured in
position before switching on.
●
To avoid electric shocks, never let
the power unit, cord or plug get wet.
●
Never use a damaged mincer. Get it
checked or repaired: see ‘service’.
●
Never use an unauthorised
attachment.
●
Appliances used in a place of work
should be tested and inspected
regularly.
●
This mincer is not intended for use
by young children or infirm persons
without supervision.
●
Young children should be supervised
to ensure they do not play with the
appliance.
●
Only use the machine for its
intended domestic use.
before plugging in
●
Make sure your electricity supply is
the same as the one shown on the
underside of your machine.
Important (UK) only
●
The wires in the cord are coloured
as follows:
Blue = Neutral
Brown = Live.
●
This machine complies with
European Economic Community
Directive 89/336/EEC.
before using for the first time
1 Remove all packaging.
2 Wash the parts see ‘care and
cleaning’
mincer
power unit
attachment outlet
locking screw
off button - Red
on - Green
reverse button - Blue
spanner
ring nut
mincer screens: fine, medium,
coarse
cutter
scroll
mincer body
tray
pusher
pusher lid
dish/cover
to assemble
1 Fit the scroll inside the mincer body.
2 Fit the cutter – cutting side
outermost
.
Ensure it’s seated
properly – otherwise you
could damage your mincer.
3 Fit a mincer screen
. Put the notch
over the pin.
●
Use the fine screen for raw meat;
fish; small nuts; or cooked meat for
shepherd’s pie or meat loaves.
●
Use the medium and coarse screens
for raw meat; fish; nuts; vegetables;
hard cheese; or peel or dried fruit for
puddings and marmalade.
4 Loosely fit the ring nut.
to use the mincer
1 Release the locking screw by turning
anticlockwise
, then slide the
attachment into the outlet
.
2 Turn it both ways until it locks into
place. Then turn the locking screw
English
4
k
m
l
b
c
d
e
f
g
h
i
j
n
o
p
a
