Philips WAC3500D - Инструкция по эксплуатации - Страница 4

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved 13- Amp
plug. To change a fuse in this type of plug, proceed as
follows:

1

Remove fuse cover and fuse.

2

Fix the new fuse which should be a BS1362 5-
Amp, A.S.T.A. or BSI approved type.

3

Refit the fuse cover.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug should be fitted in its place.
If the mains plug contains a fuse, it should have
a value of 5 Amp. If a plug without a fuse is
used, the fuse at the distribution board should
not be greater than 5 Amp.

Note: The severed plug must be disposed, so as to
avoid a possible shock hazard due to it being
inserted into another 13-Amp socket.

How to connect a plug

The wires in the mains lead are colored using the fol-
lowing codes: blue = neutral (N), brown = live (L).

•

As these colors may not correspond with the
color markings identifying the terminals in your
plug, proceed as follows:
– Connect the blue wire to the terminal

marked N or colored black.

– Connect the brown wire to the terminal

marked L or colored red.

– Do not connect either wire to the ear th

terminal in the plug, marked E (or e) or col-
ored green (or green and yellow).

Before replacing the plug cover, make sure that the
cord grip is clamped over the sheath of the lead and
not simply over the two wires.

Copyright in the U.K.

Recording and playback of any materials may require
consent. See Copyright Act 1956 and The
Performerb’s Protection Acts 1958 to 1972.

Norge

Typeskilt finnes på apparatens bakside.

Observer: Nettbryteren er sekundert
innkoplet. Den innebygde netdelen er der-
for ikke frakoplet nettet så lenge appa-
ratet er tilsluttet nettkontakten.

For å redusere faren for brann eller elektrisk
støt, skal apparatet ikke utsettes for regn eller
fuktighet.

CLASS 1

LASER PRODUCT