Lavor PRO HYPER C 1211 LP RA 8.654.0086 - Инструкция по эксплуатации - Страница 17

Мойки высокого давления Lavor PRO HYPER C 1211 LP RA 8.654.0086 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 124
Загружаем инструкцию
background image

the pump.

 

1 0 W A R N I N G : 

Appliances equipped 

with A.S.S – Automatic Stop System: these 

appliances should not be left in standby for 

more than 5 minutes.

 11WARNING: Switch the appliance off 

completely (master switch on (0)OFF) 

whenever it is left unattended.

 12WARNING:  Every machine is tested in its 

operating conditions, so it is normal for a few 

drops of water to be left inside it.

 13WARNING: Take care not damage the 

electric cable. If the supply cord is damaged, 

it must be replaced by the manufacturer, its 

service agent or similarly qualified persons in 

order to avoid a hazard

 14WARNING: Appliance with fluid under 

pressure. Keep a firm hold on the gun and be 

prepared to take the kickback pressure. Only 

use the high pressure nozzle provided with 

the appliance.

 16WARNING: This appliance is not intended 

for use by persons (including children) 

with reduced physical, sensory or mental 

capabilities, or lack of experience and 

knowledge, unless they have been given 

supervision or instruction concerning use 

of the appliance by a person responsible for 

their safety.

 17WARNING: Children should be supervised 

to ensure that they do not play with the 

appliance.

 18WARNING: Never start the high-pressure 

cleaner without first completely unwinding 

the high-pressure hose.

 19WARNING: When winding and unwinding 

the pipe take care not to cause the high-

pressure cleaner to overturn.

 20WARNING: Before unwinding or winding 

the hose, switch the machine off and release 

the pressure in the hose itself (switching 

off).

 21WARNING:  Risk of explosion — Do not 

spray flammable liquids.

 22WARNING: 

To ensure machine 

safety, use only original spare parts from 

the manufacturer or approved by the 

manufacturer.

 23WARNING:  Do not direct the jet against 

yourself or others in order to clean clothes or 

foot-wear.

• 

24WARNING: High pressure cleaners 

shall not be used by children or untrained 

personnel.

 WARNING: Water that has flown through 

backflow preventers is considered to be 

non-potable.

• 

XX WARNING: the machine shall be 

disconnected from its power source, by 

removing the plug from the socket-outlet, 

during cleaning or maintenance and when 

replacing spare parts 

• 

XJ WARNING: If an extension cord is used, 

the plug and socket must be of watertight 

construction.

• 

XY WARNING: Inadequate extension cords 

can be dangerous.

WARNING:  It is absolutely forbidden to 

use the machine in potentially explosive 

environments or areas.

 WARNING:

-  NEVER EVER TOUCH THE MACHINE WITH WET 

HANDS OR BARE FEET.

-  NEVER PULL THE POWER SUPPLY CABLE OR 

MACHINE IN ORDER TO DISCONNECT THE PLUG 

FROM THE SOCKET.

-  IF  DURING  FUNCTIONING  THE  POWER SUPPLY 

RUNS OUT, FOR SAFETY REASONS, TURN THE 

MACHINE OFF.

>  SAFETY  DEVICE

 WARNING: the gun is fitted with a safety 

catch. Whenever use of the machine is 

interrupted it is important to operate the 

safety catch to prevent accidental activation 

of the jet.

-   Safety features: gun equipped with safety 

locking device, appliance equipped with 

(Class I) overload cutout, pump equipped 

with by-pass valve or shutdown device.

-   The safety button on the gun is not there 

to lock the lever during operation, but to 

prevent its accidental operation.

 WARNING:  The appliance is equipped 

with a motor protection device: in case of 

device intervention, wait some minutes or, 

in alternative, disconnect and re-connect 

the product to the electric system. In case 

this problem repeats again or if the product 

does not start again, take the product to the 

nearest After Sales Service Point

> STABILITY  

EN

17

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Lavor PRO HYPER C 1211 LP RA 8.654.0086?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"