Karcher HDS 8/18-4 C Classic 1.174-232 - Инструкция по эксплуатации - Страница 19

Мойки высокого давления Karcher HDS 8/18-4 C Classic 1.174-232 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 316
Загружаем инструкцию
background image

– 3

– Please follow the national rules and 

regulations for fluid spray jets of the re-
spective country.

– Please follow the national rules and 

regulations for accident prevention of 
the respective country. Fluid spray jets 
must be tested regularly and the results 
of these tests must be documented in 
writing.

– The heating appliance of the machine is 

an ignition plant. All national laws and 
regulations about heating systems must 
also be followed.

Safety devices serve for the protection of 
the user and must not be put out of opera-
tion or bypassed with respect to their func-
tion.

– When the water supply at the pump 

head is reduced, the overflow valve 
opens and part of the water flows back 
to the suction side of the pump.

– If the hand-spray gun is closed, so that 

the whole water flows back to the pump 
suck side, the pressure switch at the 
overflow valve shuts down the pump.

– If the hand spray gun is opened, the 

pressure switch on the cylinder head 
turns the pump back on.

The overflow valve is set by the manufac-
turer and sealed. Setting only by customer 
service.

– The safety valve opens, when the over-

flow valve resp. the pressure switch is 
broken.

The safety valve is set by the manufacturer 
and sealed. Setting only by customer ser-
vice.

– The water shortage safeguard prevents 

the burner to be turned on when there is 
water shortage.

– A sieve prevents the contamination of 

the safeguard and must be cleaned reg-
ular.

– The temperature stop switches off the 

machine when the waste gases have 
reached very high temperatures.

pH value

6,5...9,5

electrical conductivity *

Conductivity 
fresh water 
+1200 

μ

S/cm

settleable solids **

< 0,5 mg/l

total suspended solids *** < 50 mg/l
Hydrocarbons

< 20 mg/l

Chloride

< 300 mg/l

Sulphate

< 240 mg/l

Calcium

< 200 mg/l

Total hardness

< 28 °dH
< 50 °TH
< 500 ppm (mg 
CaCO

3

/l)

Iron

< 0,5 mg/l

Manganese

< 0,05 mg/l

Copper

< 2 mg/l

Active chloride

< 0,3 mg/l

free of bad odours
* Maximum total 2000 

μ

S/cm

** Test volume 1 l, settling time 30 min
*** no abrasive substances

Safety instructions

Safety Devices

Overflow valve with two pressure 

switches

Safety valve

Water shortage safeguard

Temperature stop for exhaust gases

19

EN

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Karcher HDS 8/18-4 C Classic 1.174-232?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"