Bosch AQUATAK 42-13 0.600.8A7.301 - Инструкция по эксплуатации - Страница 11

Мойки высокого давления Bosch AQUATAK 42-13 0.600.8A7.301 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 268
Загружаем инструкцию
background image

 English | 

11

Bosch Power Tools

F 016 L81 056 | (18.2.15)

English

Safety Notes
Explanation of symbols

General hazard safety alert.

Never direct the water jet 
at people, animals, the unit 
or electric components.

Warning: High pressure jets can be dan-
gerous if subject to misuse.

According to the applicable 
regulations, the appliance 
must never be used on the 

drinking water network without a 
system separator. Use a separator as 
per IEC 61770 Type BA. 
Water flowing though a system sepa-
rator is considered not drinkable. 
Safety Notes for pressure washer

Read all safety warnings and 
all instructions. 

Failure to fol-

low the warnings and instruc-

tions may result in electric shock, fire 
and/or serious injury.

The warning and information signs 
attached to the unit provide impor-
tant information for safe operation.
Apart from the information in the op-
erating instructions comply with the 
general safety regulations and regu-
lations for the prevention of acci-
dents.
Connecting to the mains

The voltage indicated on the rating 

plate must correspond to the voltage 
of the power source.

We recommend that this equipment 

is only connected into a socket which 
is protected by a circuit-breaker that 
would be actuated by a 30 mA residu-
al current.

Remove the plug from socket when-

ever the machine is left unattended 
for any period.

The electric supply installation 

should comply with IEC 60364-1.

If the supply cord is damaged, it must 

be replaced by the manufacturer, its 
service agent or similarly qualified 
persons in order to avoid a hazard.

If the plug is damaged, pay attention 

to the following:

Plugs and sockets situated near the 

work site or outdoors should be to 
class IP 55 of BS 5490 to provide ad-
equate protection against ingress of 
water, etc. and cable entries require 
effective sealing. Rubber shrouds 
should be provided over cable 
glands. Drip-proof (class IP X2 of 
BS 5490) plugs and sockets to 
BS 4343 are suitable for use indoors 
where the plug is away from the water 
spray area where the appliance is in 
use.

Never touch the mains plug with wet 

hands.

Do not pull plug while operating the 

device.

Do not run over, crush or pull the 

power supply cord or extension cord, 
otherwise it may be damaged. Pro-
tect the cable from heat, oil and sharp 
edges.

OBJ_DOKU-40725-003.fm  Page 11  Wednesday, February 18, 2015  9:24 AM

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Bosch AQUATAK 42-13 0.600.8A7.301?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"