ADA GroundDrill-10 - Инструкция по эксплуатации - Страница 8

8

English

DAILY  MAINTENANCE

1. Check the auger bit for proper centering, sharpness and cracks. An au-

ger bit with damaged centering vibrates strongly and could damage the 

device if it has  damaged centering. 

2. Сheck for external damages on the ground drill.

3. Check the nuts and screws. They must be tighten well.  

WEEKLY MAINTENANCE

1. Check the starter, especially the cord and the return spring.

2. Clean the outside surface of the spark plug.

3. Сheck the filling of the gear case with the lubricant. 

4. Cleaning the air filter.

MONTHLY MAINTENANCE

1. Flushing the fuel tank with gasoline.

2. Cleaning the outer surface of the carburetor and the area around it.

3. Cleaning the outer surface.

WARRANTY

This product is warranted by the manufacturer to the original purchaser to 

be free from defects in material and workmanship under normal use for a 

period of one (1) year from the date of purchase.

If the product is used for commercial, professional or business purposes, 

the warranty period is 3 months.

Claims for the quality of the product are accepted only on condition that 

the discovered defects and complaints are declared within the warranty 

period established for the product.

During the warranty period, and upon proof of purchase, the product will 

be repaired or replaced (with the same or similar model at manufactures 

option) for free. In case of a defect please contact the dealer where you 

originally purchased this product. 

The warranty will not apply to this product if it has been misused, abused 

or altered. 

To obtain warranty service, the tool is provided to the service center:

in full complete set;

with warranty card;

in clean condition;

If these requirements are not met, the service center has the right to re-

fuse you  in warranty service.