Schaub Lorenz SLF S265X2 - Инструкция по эксплуатации - Страница 41

EN - 41

7  BEFORE CALLING AFTER-SALES SERVICE

Errors

Your freezer will warn you if the temperature of the freezer is at an improper level or if a 

problem occurs with the appliance. Warning codes are displayed in the freezer Indicators.

ERROR TYPE

MEANING

WHY

WHAT TO DO

E01

Sensor warning

Call Service for assistance as 

soon as possible.

E02

Sensor warning

Call Service for assistance as 

soon as possible.

E03

Sensor warning

Call Service for assistance as 

soon as possible.

E06

Sensor warning

Call Service for assistance as 

soon as possible.

E07

Sensor warning

Call Service for assistance as 

soon as possible.

E08

Low Voltage Warning

Power supply to the device 

has dropped to below 

170 V.

 -This is not a device failure, this 

error helps to prevent damages 

to the compressor.

 -The voltage needs to be 

increased back to required 

levels

If this warning continues an 

authorised technician needs to be 

contacted.

E09

Freezer compartment 

is not cold enough

Likely to occur after long 

term power failure.

1. Set the freezer temperature 

to a colder value or set Super 

Freeze. This should remove 

the error code once the 

required temperature has been 

reached. Keep doors closed 

to improve time taken to reach 

the correct temperature.

2. 

Remove any products which 

have thawed/defrosted during 

this error. They can be used 

within a short period of time.

3. Do not add any fresh produce 

to the freezer compartment 

until the correct temperature 

has been reached and the 

error is no longer.

If this warning continues an 

authorised technician needs to be 

contacted.

If you are experiencing a problem with 

your 

appliance

, please check the following 

before contacting the after-sales service.

Your appliance is not operating

Check if:

•  There is power

• 

The plug is correctly placed in the socket

• 

The plug fuse or the mains fuse has 

blown

• 

The socket is defective. To check this, 

plug another working appliance into the 

same socket.

The appliance performs poorly

Check if:

• 

The appliance is overloaded

• 

The appliance door is closed properly