VITEK VT-1698 SR - Инструкция по эксплуатации - Страница 6

6

Use this button to set the time of the defrosting up to 95 minutes.

11. Stop/Cancel button 
 

Touch to stop the cooking mode, to cancel the cooking program, to switch on the interlocking mode (to prevent the 
unit from been used by children).

12.  Time, Power, Weight knob
 

Turn to set up the time, power, or weight.

13.  Auto menu button
 

Touch to choose the preset program of cooking the foodstuff.

А-1 – auto heating; А-2 - vegetables; А-3 - fish; А-4 - meet; А-5 Paste; Potatoes; А-7 - Pizza; А-8 - soup

14. Clock/Preset button
 

Touch to set up the time, initial time of foodstuff cooking.

15.  Defrost by weight button
 

Use this button to defrost the foodstuff by weight in range from 100 g up to 2000 g.

16.  Start/Express cooking button
 

Use this button to heat the foodstuff up or for fast cooking.

Display

The current time. time of cooking, power levels, and operating mode icons are indicated on the display.
17.  Microwave cooking mode icon
18. Defrost mode icon
19. Separating points
20. Icon indicating the oven is operating at the 100% and 80% power level
21.  Icon indicating the oven is operating at the 50, 30 and 10% power level
22. Icon of the operation of current time and initial cooking time setting
23. Icon indicating the interlock mode is on to prevent the oven from been used by children
24. Icon indicating the mode of auto cooking is on
25. Icon indicating the weight of the foodstuff is selected
26. Icon of auto cooking program (А-8 – soup)
27. Icon indicating the grill is on.

Assembling the microwave oven

Remove the packing material and accessories from the operating chamber of the oven. Examine the oven, make sure 
there are no any deformations. Special attention should be paid to the condition of the oven door, make sure there are 
no any deformations. Otherwise do not install and switch the microwave oven on.

Protective coating

Housing: if there is the protective coating, remove it from the surface of the housing.
Do not remove the light gray mica plate inside the operating chamber. It is used to protect the magnetron.

Glass tray installation

1.  Install the support of the glass tray (4) in the opening in the bottom of the operating chamber.
2.  Place the roller ring (5) on the bottom of the operating chamber.
3.  Install the glass tray (6) on the roller ring carefully, and unite the peaks on the tray with the slots of the support. Never 

install the glass tray by the lower part upwards.

•   Do not hinder the tray rotation while the oven is operating.
•   Always use the glass tray, roller ring, and tray support while cooking the foodstuff,
•   The foodstuff and the dishes should be placed on the glass tray only.
•   The glass tray may be rotated either clockwise or anti clockwise, it is normal.
•   In case of small cracks, splits or chips on the glass tray, replace the tray immediately.

Installation

•  Make sure the operating voltage and power of the oven meet the parameters of the local electricity supply network. 

Connect the oven to the wall outlet with the reliable grounding only.

•   Mount the oven on the flat, firm surface. Choose the place inaccessible by the small children.
•   The distance between the back and side walls of the oven and the wall should be at least 7-8 cm, and the free space 

above the top of the oven should be at least 30 cm.

•   Do not detach the support legs from the bottom of the microwave oven.
•   Do not block the ventilation openings on the housing of the microwave oven.
•   Place the microwave oven as far from the TV set and radio tuners as possible to avoid TV or radio signal distortions and 

noise.

 ENGLISH

1698_new.indd   6

1698_new.indd   6

22.07.2010   10:19:53

22.07.2010   10:19:53