Bosch HMT84M461R - Инструкция по эксплуатации - Страница 22

22

Malfunction table

Malfunctions often have simple explanations. Please refer to the 

malfunction table before calling the after-sales service.
If a meal does not turn out exactly as you wanted, refer to the 

Tested for you in our cooking studio

 section, where you will 

find plenty of cooking tips and tricks.

: 

Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried 
out by one of our trained after-sales engineers.
You can take remedial action yourself for some error 

messages.

Troubleshooting

After-sales service

Our after-sales service is there for you if your appliance needs 

to be repaired. We will always find the right solution in order to 

avoid unnecessary visits from a service technician.

E number and FD number

When calling us, please give the product number (E no.) and 

the production number (FD no.) so that we can provide you with 

the correct advice. The rating plate bearing these numbers can 

be found on the right-hand side when you open the appliance 

door. To save time, you can make a note of the number of your 

appliance and the telephone number of the after-sales service 

in the space below, should it be required.

Please note that there will be a fee for a visit by a service 

technician in the event of a malfunction, even during the 

warranty period.
Please find the contact data of all countries in the enclosed 

customer service list.

To book an engineer visit and product advice

Rely on the professionalism of the manufacturer. You can 

therefore be sure that the repair is carried out by trained service 

technicians who carry original spare parts for your appliances.
This appliance corresponds to the standards EN 55011 and 

CISPR 11. It is a Group 2, Class B product.
Group 2 means that microwaves are produced for the purpose 

of heating food. Class B states that the appliance is suitable for 

private households.

Technical data

Error message

Possible cause

Remedy/Note

The appliance does not work

The plug is not plugged into the mains.

Plug the plug in

Power cut

Check whether the kitchen light works.

Faulty circuit breaker

Look in the fuse box and check that the cir-

cuit breaker for the appliance is in working 

order.

Incorrect operation

Switch off the circuit breaker in the fuse 

box. Reconnect it after approx. 

10 seconds.

Three zeros flash in the display.

Power cut

Reset the time.

The appliance is not in operation. A 

cooking time appears in the display.

The rotary selector was accidentally pressed.

Press the Stop button.

The Start button was not pressed after the set-

ting was made.

Press the Start button or clear the setting 

by pressing the Stop button.

The microwave does not work.

The door was not fully closed.

Check whether food remains or foreign 

material is trapped in the door.

The Start button was not pressed.

Press the Start button.

The food takes longer than usual to 

heat up

The microwave power setting was too low.

Select a higher microwave power setting.

You have placed a larger amount of food than 

normal in the appliance.

Double the amount = double the cooking 

time.

The food was colder than usual.

Stir or turn the food during cooking

The turntable is making a scratching 

or grinding noise.

There is dirt or a foreign object in the area 

around the turntable drive.

Clean the roller ring and recess in the 

cooking compartment.

Microwave operation has been can-

celled for no apparent reason.

The microwave has a fault.

If this fault occurs repeatedly, please call 

the after-sales service. 

E no.

FD no.

After-sales service 

O

GB

0344 892 8979 

Calls charged at local or mobile rate.

IE

01450 2655 

0.03 € per minute at peak. Off peak 0.0088 € per 

minute.

Input voltage

AC 220-230 V, 50 Hz

Power consumption

1450 W

Maximum output power

900 W

Microwave frequency

2450 MHz

Fuse

10 A