Bosch HMT84M461R - Инструкция по эксплуатации - Страница 21

21

Starting the memory

It is very easy to start the saved programme. Place your meal 

into the appliance. Close the appliance door.

1.

Press the 

i

 button.

The saved settings are displayed.

2.

Press the Start button.

The cooking time counts down in the display.

The cooking time has elapsed

A signal sounds. Open the appliance door or press Stop. The 

clock reappears.

Pausing

Press the Stop button once, or open the appliance door. Press 

the START button after closing the door.

Cancelling the setting

Press the Stop button twice, or open the appliance door and 

press the Stop button once.

Changing the signal duration

You will hear a signal when the appliance is switched off. You 

can change the duration of the acoustic signal. 
Press the Start button for approx. 6 seconds.

The new signal duration is adopted. 

The clock reappears. 
The following are possible: 

Short signal duration - 3 tones 

Long signal duration - 30 tones.

Care and cleaning

With careful care and cleaning your microwave oven will retain 

its looks and remain good order. We will explain here how you 

should care for and clean your appliance correctly.

: 

Risk of short circuit!

Never use high-pressure cleaners or steam cleaners to clean 
the oven.

: 

Risk of burns!

Never clean the appliance immediately after switching off. Let 
the appliance cool down. 

: 

Risk of electric shock!

Do not immerse the appliance in water or clean under a jet of 
water.
Surfaces are different, and damage caused by using the wrong 

cleaning agent can be avoided by observing the information in 

the table below.

Do not use

■

sharp or abrasive cleaning agents. 

The surface could be damaged. If such a substance comes 

into contact with the front of the appliance, wash it off 

immediately with water.

■

metal or glass scrapers to clean the glass in the appliance 

door.

■

metal or glass scrapers for cleaning the seal.

■

hard scouring pads or cleaning sponges. 

Wash new sponge cloths thoroughly before use.

■

cleaning agents with high concentrations of alcohol.

Cleaning agents

Caution!

Before cleaning, unplug the appliance from the mains or switch 

off the circuit breaker in the fuse box. Clean the outside of the 

appliance and the cooking compartment with a damp cloth and 

mild detergent. Dry with a clean cloth.

Area

Cleaning agents

Appliance front

Hot soapy water: 

Clean with a dish cloth and dry with a 

soft cloth. Do not use glass cleaners or 

metal or glass scrapers for cleaning.

Appliance front with 

stainless steel

Hot soapy water: 

Clean with a dish cloth and dry with a 

soft cloth. Remove flecks of limescale, 

grease, starch and albumin (e.g. egg 

white) immediately. Corrosion can form 

under such residues. Special stainless 

steel cleaning agents can be obtained 

from the after-sales service or from spe-

cialist shops. Do not use glass cleaners 

or metal or glass scrapers for cleaning.

Cooking compart-

ment made of stain-

less steel

Hot soapy water or a vinegar solution: 

Clean with a dish cloth and dry with a 

soft cloth. 

If the oven is very dirty: use oven 

cleaner, but only when cooking com-

partment is cold. It is best to use a stain-

less-steel sponge. Do not use oven 

spray or other aggressive oven cleaners 

or abrasive materials. Scouring pads, 

rough sponges and pan cleaners are 

also unsuitable. These items scratch the 

surface. Allow the interior surfaces to 

dry thoroughly.

Recess in cooking 

compartment

Damp cloth: 

Ensure that no water seeps through the 

turntable drive into the appliance inte-

rior.

Turntable and turnta-

ble ring

Hot soapy water: 

When putting the turntable back in 

place, make sure it slots in correctly.

Door panels

Glass cleaner: 

Clean with a dish cloth. Do not use a 

glass scraper.

Seal

Hot soapy water: 

Clean with a dish cloth, do not scour. Do 

not use a metal or glass scraper for 

cleaning.