Метеостанции Uniel UTV-65K - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
RU 10
UTV 65
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
• CLOCK & CALENDAR
Press [CLOCK ] to toggle display between time, calendar, day of the week & pressure reading.
Hold [CLOCK ] button to enter clock setting mode. Using ▼ or ▼ to adjust and [CLOCK ] to con-
firm, the following values can be set in sequence:
12/24hr format > Hr > Min > Yr > D/M or M/D format > Month > Date > Pressure unit > EXIT.
•
HOME TIME, WORLD (ZONE) TIME
Hold [ZONE] to enter world (zone) time setting mode.
Press ▼ or ▼ to enter the desired hour offset value from –12 to +12 hours.
Press [CLOCK ] to confirm and exit.
Press [ZONE] button to toggle between home time and world (zone) time.
“ZONE” icon appears when world (zone) time is selected.
When zone time is not used, keep zone time to “0”.
•
ALARM SETTINGS
Press [ALARM] to show alarm time and “AL.” icon will appear.
Press again to enable or disable the alarm. Bell icon “ ” appears when alarm is enabled.
Hold [ALARM] to enter alarm time setting mode.
Press ▼ or ▼ to enter the desired Hr/ Min values and press [ALARM] to confirm setting.
•
SNOOZE
When alarm is going off, press [SNOOZE] button to trigger snooze alarm and the bell icon “ ” will
flash indicating it is in the snooze mode. Press [ALARM] key to stop alarm for one day.
•
LOW BATTERY INDICATION
Low battery indication is available for the home unit itself and all of the 3 remote channels. Replace the
batteries and follow the setup procedure in this instruction manual.
•
SPECIFICATIONS
Indoor Temperature:
0 C to + 50 C (+32 F to +122 F)
Outdoor Temperature:
-40 C to +60 C (-34 F to +140 F)
In/Out Humidity
:
20% - 99% RH
Radio frequency:
433 MHz
Quantity remote sensors:
max. 3
Channel:
5
Transmission:
up to 30M in open area, RF434 MHz
Temperature Resolution:
0.1 C
Humidity Resolution:
1 %
Main batteries:
3 V * 4 pcs. / CR2032
Remote sensor
1,5 V x 2 pcs / AAA.
