Метеостанции RST 32711 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
G: First Quarter
H: Waxing Gibbous
snooze alarm time function
•
Hold "S ALARM" button for 3 seconds to enter Single Alarm Time set-
ting. Press "+"or"%"buttons to adjust the alarm time.
•
Press "S ALARM "button to switch alarm on or off.
•
Hold "W ALARM" button for 3 seconds to enter Weekday(except
Saturday and Sunday) Alarm Time setting. Press "+" or "%" buttons to
adjust the alarm time.
•
Press "W ALARM "button to switch Weekday Alarm on or off.
•
The snooze time by 8 minutes ,then it alarms again
•
Press and hold the "snooze/alarm stop" button for 3 seconds to stop
the alarm or snooze alarm.
When alarm switch off (no W alarm and no S alarm) on alarm display must
be show "OFF" instead alarm time. When we set alarm (W alarm or S
alarm) on display we can show alarm time and symbol with description
(W or S). When Walarm and S alarm turn on simultaneously, it display the
setting early alarm time for alarm time.
thermometer unit
Press "oC/oF" button to select Temperature in Celsius mode/Fahrenheit
mode.
backlight and projector function
•
Press "rotate 180", the projection image can rotate 180 degree automat-
ically, press and hold "temp.out/in" for three seconds, we can choose
the projection temperature to be outdo or indoor temperature. When
we choose it to be outdoor temperature, projection temperature and
outdoor temperature, which is on the main LCD, are the same display.
•
Rotate "image rotation", we can adjust angle of projection pattern,
turn "focus" button can adjust the definition of the pattern.
•
Insert the fan%out of the adapter into the DC hole in the bottom of
the main station. And insert the input into the 230V alternating cur-
rent jack, the backlight and projection will be lightened all the times.
See the following picture for reference.
"( memory" button
•
Press "% memory" button to show the maximum indoor temperature.
"MAX" is shown on the LCD
•
Press "% memory" button again to show the minimum indoor temper-
ature.
"MIN" is shown on the LCD.
•
When the "max" or "min" is showing on the LCD, press and hold "% mem-
ory "button for 3 seconds to clear the recorded maximum and minimum
reading.
•
When it is in the receiving of RCC, press "% memory, it can exit the
18
manual32711-712-2011:32711-712Manual-2011 25.08.2011 12:38 Page 18
