RST 32711 - Инструкция по эксплуатации - Страница 17

•

When the time run to DST ZONE, the time display will add one hour
automatically and with "dst" display. When it exits DST ZONE, the time
display will detract one hour automatically and cancel "dst" display. 

radio controlled receiving mode

After entering RCC receiving mode, "rcc" character will be in blink in the
LCD. If it had detected the available signal, with the blink of  

in the

front of "rcc",  and "rcc" stop blinking at the same time. After receive suc-
cessfully, " rcc" and 

will display in the LCD all the times. If the setting

time zone won't be zero, it will display local time according to the setting
time zone automatically.
The  weather station will begin to receive RCC automatically at 1:00, 2:00,
3:00, 4:00 each morning, each time will last for at best 10 minutes.

LCD backlight

The backlight changing method is as follows:  Press and hold “oC/oF” for 3
seconds to switch backlight Mode A and B. In Mode A, the backlight
change according to the indoor temperature, Mode B, user can change
the preferable color by manually. When it is in Mode B, press “backlight” but-
ton for 3 seconds, it will enter the backlight color setting mode manually, and
the backlight will blink, then press “+” button to choose the preferable back-
light color.

moon phase and tide

There are eight pattern for moon phase, see the following pattern. When
we use dynamic demonstrative method, it will change to be another
moon phase each second in the normal condition. The current moon
phase will last for 5 seconds when it is in the demonstration.
There are three indicators for tide: low, medium, high. 
A: Full Moon

B: Waxing Gibbous

C: Last Quarter  

D: Waxing Crescent 

E: New Moon

F: Waning Crescent   

17

manual32711-712-2011:32711-712Manual-2011  25.08.2011  12:38  Page 17