Материнские платы GIGABYTE GA PA65 UD3 B3 rev 1 0 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
- 89 -
Appendix
C. Rebuilding an Array
Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding applies
only to fault-tolerant arrays such as RAID 1 array. The procedures below assume a new drive is added to re-
place a failed drive to rebuild a RAID 1 array. (Note: The new drive must have equal or greater capacity than
the old one.)
Turn off your computer and replace the failed hard drive with a new one. Restart your computer. To enable an
automatic rebuild in the operating system, you have to set the new hard drive as a Spare drive in the RAID
setup utility first.
•
Enabling Automatic Rebuild
Step 1:
When the message "Press <Ctrl>+<M> to enter BIOS Setup or <Space> to continue" appears, press <Ctrl> +
<M> to enter the RAID setup utility. On the main screen, press <Enter> on the
RAID
tab and then press <En-
ter> on
Spare Management
.
Step 2:
The new hard drive will be displayed on the screen. Press <Enter> or <Space> on the new hard drive to select
it and then press <Enter> on
NEXT
. When prompted, press <Y> to confirm. The new hard drive is now set as a
Spare drive.
[ Selection]
[ Adapter]
[ Devices]
[ RAID ]
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
RAID Config
Port
Disk Name
Size
Max Speed Status
NEXT
Spare Management
* S0
SATA: WDC WD800JD-22LSA0
76.3GB
SATA 3Gb/s FREE
ENTER/SPACE: Select, ESC: Back/Exit
ENTER/SPACE: Select, ESC: Back/Exit
[ Selection]
[ Adapter]
[ Devices]
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
Create VD
Delete VD
Wipe out disk
RAID Config
Spare Management
[ RAID ]
