GIGABYTE GA MA785GPM UD2H rev 1 0 - Инструкция по эксплуатации - Страница 47

- 47 -

BIOS Setup

  Onboard VGA output connect

Specifies the graphics display of the onboard VGA output from the D-SUB/DVI-D or D-SUB/HDMI.

Auto   

Lets the BIOS automatically determines the primary display port for output,  

depending on to which port the display device is connected, D-SUB/DVI-D or  

D-SUB/HDMI. (Default) 

D-SUB/DVI  

Sets the D-SUB/DVI-D as the graphics display. 

D-SUB/HDMI   Sets the D-SUB/HDMI as the graphics display.

  AMD C1E Support

 (Note)

Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the CPU 
core  frequency  and  voltage  will  be  reduced  during  system  halt  state  to  decrease  power  consumption. 
(Default: Disabled)

  Virtualization

Virtualization allows a platform to run multiple operating systems and applications in independent parti-
tions. With virtualization, one computer system can function as multiple virtual systems. 

(Default: Disabled) 

  Patch AMD TLB Erratum

 (Note)

Enables or disables the Patch AMD TLB Erratum function. (Default: Enabled)

  AMD K8 Cool&Quiet control

Auto   

Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to  

reduce heat output from your computer and its power consumption. (Default)

Disabled   

Disables this function.

  Hard Disk Boot Priority

Specifies  the  sequence  of  loading  the  operating  system  from  the  installed  hard  drives.    Use  the  up  or 

down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or 

<PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when finished.  

  First/Second/Third Boot Device

Specifies  the  boot  order  from  the  available  devices.  Use  the  up  or  down  arrow  key  to  select  a  device 

and press <Enter> to accept. Options are: Floppy, LS120, Hard Disk, CDROM, ZIP, USB-FDD, USB-ZIP, 
USB-CDROM, USB-HDD, Legacy LAN, Disabled. 

  Password Check 

Specifies  whether  a  password  is  required  every  time  the  system  boots,  or  only  when  you  enter  BIOS 
Setup. After configuring this item, set the password(s) under the 

Set Supervisor/User Password

 item in 

the BIOS Main Menu.

Setup   

A password is only required for entering the BIOS Setup program. (Default)

System    

A password is required for booting the system and for entering the BIOS Setup  

program.

  HDD S.M.A.R.T. Capability

Enables  or  disables  the  S.M.A.R.T.  (Self  Monitoring  and  Reporting Technology)  capability  of  your  hard 
drive. This feature allows your system to report read/write errors of the hard drive and to issue warnings 
when a third party hardware monitor utility is installed. (Default: Enabled)

(Note)  This item appears only if you install a CPU that supports this feature.