Материнские платы GIGABYTE GA MA785GPM UD2H rev 1 0 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
BIOS Setup
- 40 -
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced Clock Calibration
higf
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
EC Firmware Selection
[Normal]
Advanced Clock Calibration
[Disabled]
x Value (All Cores)
-2%
x Value (Core 0)
-2%
x Value (Core 1)
-2%
x Value (Core 2)
-2%
x Value (Core 3)
-2%
Advanced Clock Calibration
(Note)
EC Firmware Selection
Allows you to select the EC firmware version when Advanced Clock Calibration is enabled. After the
selection, select Save & Exit Setup in the BIOS Main Menu and then press <Y>. A message which says
"BIOS Is Updating EC Firmware!!! Don't Turn Off Or Reset System" will appear. Wait for a few seconds
and the system will automatically restart for the settings to take effect.
Normal
Uses the standard AMD EC firmware version. (Default)
Hybrid
Uses the specific AMD EC firmware version.
Advanced Clock Calibration
Allows you to determine whether to enable Advanced Clock Calibration when using an AMD Black Edi-
tion CPU.
Disabled
Disables this function. (Default)
Auto
Lets the BIOS to configure the settings to defaults.
All Cores
Configures Advanced Clock Calibration for all CPU cores.
Per Core
Individually configures Advanced Clock Calibration for each CPU core.
Value (All Cores)
This option is configurable only when
Advanced Clock Calibration
is set to
All Cores
.
Options are: -12%~+12%.
Value (Core 0), Value (Core 1), Value (Core 2), Value (Core 3)
This option is configurable only when
Advanced Clock Calibration
is set to
All Cores
.
Options are: -12%~+12%.
(Note) This item appears only if you install a CPU that supports this feature.
HT Link Frequency
Allows you to manually set the frequency for the HT Link between the CPU and chipset.
Auto
BIOS will automatically adjust the HT Link Frequency. (Default)
200 MHz~2.0 GHz Sets HT Link Frequency to 200 MHz~2.0 GHz.
