GIGABYTE GA MA74GM S2 rev 1 x - Инструкция по эксплуатации - Страница 43

- 43 -

BIOS Setup

  HDD S.M.A.R.T. Capability

Enables  or  disables  the  S.M.A.R.T.  (Self  Monitoring  and  Reporting Technology)  capability  of  your  hard 
drive. This feature allows your system to report read/write errors of the hard drive and to issue warnings 
when a third party hardware monitor utility is installed. (Default: Disabled)

  Away Mode

Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode allows the 
system to silently perform unattended tasks while in a low-power mode that appears off. 

(Default: Disabled)

  Backup BIOS Image to HDD

Allows the system to copy the BIOS image file to the hard drive. If the system BIOS is corrupted, it will 
be recovered from this image file. (Default: Disabled)

  Init Display First

Specifies  the  first  initiation  of  the  monitor  display  from  the  installed  PCI  graphics  card,  PCI  Express 

graphics card, or the onboard graphics.

PCI Slot   

Sets the PCI graphics card as the first display.(Default) 

OnChipVGA  Sets the onboard graphics as the first display.

PEG    

Sets the PCI Express graphics card as the first display. 

  Surround View

Enables or disables the Surround View function. This option is configurable only if an ATI graphics card 

is installed. (Default: Disabled)

  Graphics Display Mode

j

Specifies the graphics display of the onboard graphics output from the D-SUB/DVI-D or D-SUB/HDMI.

D-SUB/DVI  

Sets the D-SUB/DVI-D as the graphics display. (Default) 

D-SUB/HDMI   Sets the D-SUB/HDMI as the graphics display.

  Internal Graphics Mode

Disabled      Always disables the onboard graphics, whether or not a PCI Express card is installed. 

Auto   

Outputs from the onboard graphics if no PCI Express graphics card is installed. 

Always outputs from the PCI Express graphics card when a PCI Express graphics  

card is installed. (Default)

  Frame Buffer Size

Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con-
troller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 128MB, 
256MB, 512MB.

  Current Buffer Size

When 

Frame Buffer Size

 is set to

 Auto

, this item will show the system memory size automatically 

allocated for the onboard graphics controller. If you manuanlly change the Frame Buffer Size, this item  

will show the memory size you set. 

j

Only for GA-MA74GM-S2H.

(Note)  This item appears only if you install a CPU that supports this feature.