Материнские платы GIGABYTE GA MA74GM S2 rev 1 x - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
BIOS Setup
- 36 -
EC Firmware Selection
Allows you to select the EC firmware version when Advanced Clock Calibration is enabled. After the
selection, select Save & Exit Setup in the BIOS Main Menu and then press <Y>. A message which says
"BIOS Is Updating EC Firmware!!! Don't Turn Off Or Reset System" will appear. Wait for a few seconds
and the system will automatically restart for the settings to take effect.
Normal
Uses the standard AMD EC firmware version. (Default)
Hybrid
Uses the specific AMD EC firmware version.
Advanced Clock Calibration
Allows you to determine whether to enable Advanced Clock Calibration when using an AMD Black Edi-
tion CPU.
Disabled
Disables this function. (Default)
Auto
Lets the BIOS to configure the settings to defaults.
All Cores
Configures Advanced Clock Calibration for all CPU cores.
Per Core
Individually configures Advanced Clock Calibration for each CPU core.
Value (All Cores)
This option is configurable only when Advanced Clock Calibration
is set to
All Cores
.
Options are: -12%~+12%.
Value (Core 0), Value (Core 1), Value (Core 2), Value (Core 3)
This option is configurable only when Advanced Clock Calibration
is set to
All Cores
.
Options are: -12%~+12%.
CPU core Control
Allows you to determine whether to manually enable/disable CPU Core 1/2/3/4/5.
Manual
allows the
CPU Core 1/2/3/4/5 items below to be configurable..
Auto
Lets the BIOS to enable all CPU cores (number of cores available depends on the
CPU being used). (Default)
Manual
Allows you to individually enable/disable CPU Core 1/2/3/4/5.
CPU core 1/2/3/4/5
(Note)
Enables or disables CPU Core 1/2/3/4/5. (Default: Enabled)
(Note) This item appears only if you install a CPU that supports this feature.
HT Link Frequency
Allows you to manually set the frequency for the HT Link between the CPU and chipset.
Auto
BIOS will automatically adjust the HT Link Frequency. (Default)
200 MHz~1 GHz
Sets HT Link Frequency to 200 MHz~1 GHz.
CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU
being used.
CPU NorthBridge Freq.
(Note)
Allows you to alter the North Bridge controller frequency for the installed CPU. The adjustable range is
dependent on the CPU being used.
