Материнские платы GIGABYTE GA 8I845GV - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
- 4 -
GA-8I845GV Series Motherboard
English
Item Checklist
The GA-8I845GV Series motherboard
CD for motherboard driver & utility
GA-8I845GV Series user's manual
Quick PC Installation Guide
SATA RAID Manual
GC-SATA Card
(optional)
(Manual; SATA cable x 1; Power cable x 1)
I/O Shield
IDE cable x 1 / Floppy cable x 1
Serial ATA cable x 2
2 Port USB Cable x 1
4 Port USB Cable x 1
SPDIF-Kit x 1
(SPDIF Out Kit)
IEEE 1394 Cable x1
Audio Combo Kit x 1
(SURROUND-Kit + SPDIF Out Kit)
Motherboard Settings Label
Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To
protect them against damage from static electricity, you should follow some precautions whenever you
work on your computer.
1.
Unplug your computer when working on the inside.
2.
Use a grounded wrist strap before handling computer components. If you do not have one, touch
both of your hands to a safely grounded object or to a metal object, such as the power supply
case.
3.
Hold components by the edges and try not touch the IC chips, leads or connectors, or other
components.
4.
Place components on a grounded antistatic pad or on the bag that came with the components
whenever the components are separated from the system.
5.
Ensure that the ATX power supply is switched off before you plug in or remove the ATX power
connector on the motherboard.
If the motherboard has mounting holes, but they don't line up with the holes on the base and there
are no slots to attach the spacers, do not become alarmed you can still attach the spacers to the
mounting holes. Just cut the bottom portion of the spacers (the spacer may be a little hard to cut off, so
be careful of your hands). In this way you can still attach the motherboard to the base without worrying
about short circuits. Sometimes you may need to use the plastic springs to isolate the screw from the
motherboard PCB surface, because the circuit wire may be near by the hole. Be careful, don't let the
screw contact any printed circuit write or parts on the PCB that are near the fixing hole, otherwise it
may damage the board or cause board malfunctioning.
Installing the motherboard to the chassis…
WARNING!
