Beurer MG295 - Инструкция по эксплуатации - Страница 15

15

  2. Shiatsu neck massage

 Press the   

neck

   button to start the neck massage. Press the   

neck

   button again to change the 

massage direction. Press the   

neck

   button again to switch off the neck massage.

 You can adjust the height of the neck massage by holding down one of the two arrows     next to the 

neck

   button until the desired height is reached.

  3. Shiatsu back massage

  Press the 

3D shiatsu

 button. Select the desired massage region with 

full back

, 

upper back

, 

lower back

. 

  You can choose a 

spot massage

 i.e. a Shiatsu massage without vertical movement by pressing the 

spot

button. You can change the position of the spot massage by holding down one of the two arrows     

next to the 

spot

 button until the desired position is reached.   

  Massage intensity

  When using the Shiatsu Massage, two different massage speeds are available, which can be selected using 

the 

speed

 button. If you have the rolling massage activated, first press the 

3D shiatsu

 button in order to 

change to Shiatsu Massage and then set the desired massage speed.

  4. Rolling massage

  Press the 

rolling

 button. Select the desired massage region with 

full back

, 

upper back

, 

lower back

. 

  When the massage type (Shiatsu or rolling massage) is changed, the preselected region (full, upper, lower 

back) is retained. Note that the massage region must be selected again when switching from localised 

Shiatsu massage to rolling massage.

  5. Heating function

  Press the 

heat

 [15] button to switch on the heating function of the massage heads. The blue lights in the 

massage heads change colour to red.

 The device features an in-seat heat function. This can be activated using the 

heat

 [16] button.

•  Do not use the massage device for longer than 15 minutes and then allow it to cool. Using the device 

for longer can over-stimulate the muscles and cause tension instead of relaxation. The massage can be 

finished at any time by pressing the   button. Please note that on switching off, the massage heads first 

return to the starting position at the lumbar region. This is indicated by the LED flashing. Once this position 

is reached, the device switches off.

•  If the device is stopped by pressing a massage area button twice, it also returns to the starting position 

after 15 minutes and then switches off.

•  Do not disconnect the device from the mains supply during operation. Always switch it off first and wait 

until it has returned to the initial position.

 Note

•   The device has an automatic shut-off mechanism set to a maximum operating period of 15 minutes.

10. Care and storage

Cleaning

 WARNING

•   Disconnect the device before cleaning it.

•   Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the 

device or accessories.

•   Smaller stains can be removed using a cloth or moist sponge together with a little liquid detergent 

for delicate fabrics if necessary. Do not use any cleaning agents containing solvents.

•  The removable neck cover can be machine washed at 40ºC. Please note the symbols for care and 

cleaning on the label sewn into the cover.

    The PU cover at the back is secured with a hook-and-loop fastener under the material bearing the 

beurer logo and can be removed from there.

 The cover in the neck area can be removed with the zip fastener.

•   Do not use the device again until it is completely dry.