Beurer MG295 - Инструкция по эксплуатации - Страница 14

14

Hand switch

  1  Button 

  2  

timer

 button (5 – 10 – 15 minutes)

  3  

demo

 button

  4     

neck

   button 

Neck massage activation in clockwise and anti-

clockwise direction

  5  Height adjustment button   (neck massage)
  6  Height adjustment button   (neck massage)
  7  

3D shiatsu

 button (shiatsu massage)

  8  

rolling

 button (rolling massage)

  9  

spot

 buttons (localised massage)

10  Height adjustment button (localised massage)
11  

full back

 button (entire back massage)

12  

upper back

 button (upper back massage)

13  

lower back

 button (lower back massage)

14  

speed

 button (massage intensity)

15  

heat

 button (heating)

16  

heat 

button (in-seat heating)

8. Initial use  

•   Position the seat cover upright on a suitable seat with a sitting area and backrest (chair, sofa or similar). 

Make sure that the seat has a sufficiently high backrest.

•   Use the flexible fastening straps and hook-and-loop fasteners to secure the Shiatsu seat cover.

•  Connect the device to the mains by plugging the plug into the socket.

9.  Use  

Gently press your back against the massage device to start with. Then make sure that you are in a comfort-

able position before gradually shifting your weight onto the massage device.The massage must be pleasant 

and relaxing at all times. Stop the massage or change your position or the contact pressure if you find it is 

painful or unpleasant.

•   Do not force or jam any part of your body, in particular your fingers, between the moving massage elements 

or their holders in the device.

•  

Sit comfortably and upright on the seat cover. Ensure you sit centered and such that the massage heads 

can move to the left and right of your spinal column.

•  Switch on the massager with the   button. 

  The LEDs signal the massage functions which are currently selected. 

•  The automatic switch-off function is activated with selection of the massage region and is preset to 15 min-

utes. You can set the automatic switch-off function to 5, 10 or 15 minutes by pressing the 

timer

 button.

  Please note that changing the timer setting makes the timer start to count again from the beginning. To 

avoid overheating the device, select the maximum massage duration at the beginning of the massage and 

do not change it again during the massage.

  You can specify the settings as follows:
 

1. Demo run 

Press the 

demo

 button to begin a quick 5-minute run-through of the functions contained in the device. 

The manual controller indicates which function is being displayed by flashing the respective LED. The 

device switches off automatically once the demo run has finished.

3

6

5

4

8

7

10

9

12

13
15

2

16

1

11
14