Beurer EM28 - Инструкция по эксплуатации - Страница 26

26

3.  Insert the plug for the connec-

tion cable into the connector 

socket [5] on the control unit.

Replacing the battery

 Please replace the batteries 

when the battery status sym-

bol appears in the display [7]. 

• Open  the  battery  compartment 

[4] by pushing the cover in the area 

marked with an arrow and sliding 

downwards.

•  3  x  1.5  V  batteries,  type  AAA  (LR  03  Micro)  should  be 

inserted for operation. Ensure the polarity is correct. 

Observe the graphic in the battery compartment.

•  Do not use rechargeable batteries.

6. Operation

General notes on use

Do not switch on the device until the cuff is correctly 

positioned. See chapter 5.

The wrist TENS is intended for individual treatment of pain 

in the wrist.

Switching on

Hold down the On/Off button [1] until a short signal sounds 

and  the  LCD  display  [6]  switches  on.  When  the  device  is 

switched  on  for  the  first  time,  program  A  is  automatically 

activated.

Selecting a program

Press  the  program  button  P  [3]  to  switch  between  the 

programs. 

The following programs are available:

Program

Frequency

Time

A

4 Hz – 110 Hz (3 phases)

30 min.

B

4 Hz

25 min.

C

2 Hz (burst)

25 min.

D

110 Hz

25 min.

Note:

With  program  A,  you  will  feel  the  effect  become 

stronger when the program changes from phase 1 to 

phase 2 (after approx. 10 minutes). This is normal and 

intentional.  If  the  intensity  seems  too  high,  you  can 

lower it by simply pressing the intensity button 

▼

 [2].