Beurer EM28 - Инструкция по эксплуатации - Страница 25

24

25

Connecting the connection cable and position­

ing the wrist cuff

1.  Connect  the  connection  cable 

with the metallic connection clips 

on the wrist cuff.

Note

Before positioning the wrist cuff, first clean the body 

parts to be treated.

Before positioning the wrist cuff, first moisten 

the water contact electrodes and the wrist with 

water.

Slip your arm into the cuff to position the cuff on your 

wrist/lower arm. To position it more easily, please first 

brace your arm against your upper body so that you have 

a counter pressure and can then subsequently tighten 

the cuff more easily.
For  use  on  the  right  arm:  If  you  have  placed  the  cuff 

on  the  right  wrist/lower  arm,  please  pull  both  straps 

diagonally downwards.

For use on the left arm: If you have placed the cuff on 

the left wrist/lower arm, please pull both straps diago-

nally upwards. 

2.  Fix the cuff in the desired position using the buckle 

fasteners. Ensure that the cuff is not too tight but that 

the water contact electrodes still have sufficient con-

tact with the skin.